درباره ما
MIL-PRF-28750E
RELAYS, SOLID STATE, GENERAL SPECIFICATION FOR
Organization:
DLA - CC - DLA Land and Maritime
Year: 2008
Abstract: This specification covers the general requirements for hermetically sealed or encapsulated solid-state relays (SSR's) (see 6.1), incorporating semiconductor, microelectronic, and passive circuit devices.Intended Use: SSR's conforming to this specification are intended for use in communication, radar, digital control, and other electronic systems. Their principle areas of application are for aircraft, missiles, spacecraft, shipboard, and ground-support equipment. SSR's covered by this specification shall be able to operate satisfactorily in systems under the following demanding conditions: Operating temperature range of -55°C to +125°C, 20 g's to 100 g's of vibration, 50 g's to 1,500 g's of shock, up to 5,000 g's of acceleration, and have reduced susceptibility to corrosion in salt water environments. These requirements are verified under a qualification system. CAUTION: Users are cautioned to ensure that temperature limitations, transient voltages, and momentary current overloads do not exceed the applicable parameters of a SSR proposed for a specific application. During high voltage testing, due caution should be exercised to avoid damage. Polarity, when applicable, should be observed. Due to the use of nonlinear-response assembly parts and the inherent difference between electromechanical and SSR's, output impedance values for like rated electromechanical relays and SSR's are not necessarily the same.
Collections
:
Show full item record
| contributor author | DLA - CC - DLA Land and Maritime | |
| date accessioned | 2017-09-04T17:53:16Z | |
| date available | 2017-09-04T17:53:16Z | |
| date copyright | 39749 | |
| date issued | 2008 | |
| identifier other | FEBUJCAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/176447 | |
| description abstract | This specification covers the general requirements for hermetically sealed or encapsulated solid-state relays (SSR's) (see 6.1), incorporating semiconductor, microelectronic, and passive circuit devices.Intended Use: SSR's conforming to this specification are intended for use in communication, radar, digital control, and other electronic systems. Their principle areas of application are for aircraft, missiles, spacecraft, shipboard, and ground-support equipment. SSR's covered by this specification shall be able to operate satisfactorily in systems under the following demanding conditions: Operating temperature range of -55°C to +125°C, 20 g's to 100 g's of vibration, 50 g's to 1,500 g's of shock, up to 5,000 g's of acceleration, and have reduced susceptibility to corrosion in salt water environments. These requirements are verified under a qualification system. CAUTION: Users are cautioned to ensure that temperature limitations, transient voltages, and momentary current overloads do not exceed the applicable parameters of a SSR proposed for a specific application. During high voltage testing, due caution should be exercised to avoid damage. Polarity, when applicable, should be observed. Due to the use of nonlinear-response assembly parts and the inherent difference between electromechanical and SSR's, output impedance values for like rated electromechanical relays and SSR's are not necessarily the same. | |
| language | English | |
| title | MIL-PRF-28750E | num |
| title | RELAYS, SOLID STATE, GENERAL SPECIFICATION FOR | en |
| type | standard | |
| page | 60 | |
| status | Active | |
| tree | DLA - CC - DLA Land and Maritime:;2008 | |
| contenttype | fulltext |