درباره ما
KSC - NASA - KSC - Kennedy Space Center
Browse by
Recent Submissions
-
KSC-STD-Z-0004 REV F CHANGE 1
Abstract: This standard establishes applicable definitions and general design requirements for structural design at the John F. Kennedy Space Center (KSC). This standard is applicable to the framing of both conventional and ... -
KSC-STD-Z-0009 REV C W/AMD 1
Abstract: This Standard establishes engineering principles for materials, processes, methods, practices, and designs to be applied to cryogenic ground support equipment (GSE) intended for installation and use at the John F. Kennedy ... -
KSC-TM-584 REV C
Abstract: GENERAL
This manual provides guidelines for the control of corrosion of materials in facilities, systems, and equipment at the John F.Kennedy Space Center (KSC), Florida. -
KSC-SPEC-E-0024 REV A
Abstract: General
This specification covers the requirements for flexible cables of the following construction:
Conductors: Standed, tin-coated copper
Finished wire: Polyethylene-insulated, with polyamide ... -
KSC-STD-F-0004 REV F
Abstract: Purpose
This document provides additional fire protection design standards to be used in conjunction with National Aeronautics and Space Administration (NASA)-Standard (STD)-87 19.11, Safety Standard ... -
KSC-STD-E-0015 REV B
Abstract: This standard establishes the requirements and methods for marking ground support equipment (GSE) used at the John F. Kennedy Space Center (KSC), NASA.Intended Use: This standard is intended to establish ... -
KSC-DF-107 REV D
Abstract: PURPOSE AND SCOPE
This style guide establishes the standard format for certain official technical documentation prepared for or by the Spaceport Engineering and Technology (SE&T) Directorate for release at Kennedy ... -
KSC-SPEC-Z-0001 REV A
Abstract: This specification covers weldable seamless or welded, 36 percent nickel, iron-base pipe, commercially known as Invar 36 or equal and suitable for service between plus 125°F and minus 454ºF. The material covered ... -
KSC-SPEC-Z-0008 REV C
Abstract: This specification covers the requirements for the fabrication and the installation of 37-degree flared tube assemblies and the installation of 37-degree flared tube fitting assemblies used in fluid pressure systems of ... -
KSC-SPEC-E-0002A
Abstract: This specification establishes the general characteristics, construction, and material requirements for industrial/commercial racks and enclosures for use by KSC designers as components of facility support systems (FSS), ... -
KSC-STD-G-0003 REV B
Abstract: This standard establishes the methods for accomplishing qualification of those components located in nonconventional space-program-oriented facilities and equipment. This standard also provides the criteria and rationale ... -
KSC-SPEC-P-0026
Abstract: This specification covers the requirement for Halon-1301 recovered from Halon-charged systems. This specification provides a means of recovering Halon-1301 for either reclamation for alternate reuse or reprocessing to ... -
KSC-STD-Z-0005 REV B CHANGE 1
Abstract: This standard establishes the minimum engineering and technical limitations for materials, processes, methods, engineering practices, and designs to be applied to designed pneumatic ground-support equipment (GSE) intended ...