درباره ما
Browsing KSC - NASA - KSC - Kennedy Space Center by Title
Now showing items 1-20 of 94
-
KSC-C-123 REV J
Abstract: This specification establishes surface cleanliness levels, processing, handling, cleaning, test methods, packaging, protection, and inspection procedures for determining surface cleanliness for critical surfaces of ground ... -
KSC-DD-818-TR
Abstract: The data presented include launch data from STS-1 through STS-11. All Space Shuttles were launched at Pad A from Mobile Launcher Platform (MLP) - 1, except STS-6, -8, and -9, which were launched from MLP-2.
PURPOSE ... -
KSC-DE-512-SM REV L CHG 1
Abstract: Purpose
KSC-DE-512-SM establishes requirements and guidance for design and fabrication of ground systems (GS) that includes: ground support equipment (GSE), ground support systems (GSS), and facility ... -
KSC-DF-107 REV D
Abstract: PURPOSE AND SCOPE
This style guide establishes the standard format for certain official technical documentation prepared for or by the Spaceport Engineering and Technology (SE&T) Directorate for release at Kennedy ... -
KSC-E-165 REV E CHG 1
Abstract: This document specifies parts, materials, and processes used in the fabrication, maintenance, repair, and procurement of electrical and electronic control and monitoring equipment associated with ground support equipment ... -
KSC-E-166 REV C W/CHG 1
Abstract: This specification covers the general workmanship requirements and procedures for the complete installation and assembly of electrical ground support equipment (EGSE) such as terminal distributors, junction boxes, conduit ... -
KSC-F-124 REV E
Abstract: This specification establishes the requirements for flared tube fittings and fitting accessories and fluid connections, including adjustable and swivel elbows, reducers, and tees (hereinafter referred to as fittings) ... -
KSC-GP-425 REV G W/AMD 3
Abstract: This document is a compilation of standard fluid fitting parts and design standards used in the design of hydraulic and pneumatic systems used at the John F.Kennedy Space Center, Florida.
PURPOSE
The purpose of ... -
KSC-GP-435 VOL I REV F CHANGE 2
Abstract: This manual establishes the requirements, procedures, and practices for the preparation, release, revision, modification, maintenance, and control of engineering drawings prepared for or by the John F. Kennedy Space Center ... -
KSC-GP-435 VOL II REV B
Abstract: This manual establishes the requirements, procedures, and practices for the preparation, release, revision, modification, maintenance, and control of engineering drawings prepared for or by the John F. Kennedy Space Center ... -
KSC-GP-864 VOL IIA REV B W/CHG 1
Abstract: Various NASA programs at KSC make maximum use of existing ground systems (GS). Consequently, the designer must determine whether existing cables can be used as is or be modified, or if new cables are required.
This ... -
KSC-GP-986 REV A
Abstract: This document establishes the general design criteria for reusable space vehicle umbilical systems. The criteria specified herein is limited to the service arms or equivalent mechanisms, umbilical carriers and plates, ... -
KSC-KTI-5210 REV C
Abstract: This document is intended as a resource for materials selection for design of oxygen systems for KSC ground support equipment (GSE) and ground support systems (GSS). Flammability and combustion data extracted from NASA, ... -
KSC-MMA-1985-79 REV 6
Abstract: This method describes the triboelectric test device used at the Kennedy Space Center (KSC) for electrostatic evaluation of non-conducting materials, including sample preparation and preconditioning, test procedure, and ... -
KSC-MTB-175-88
Abstract: This procedure provides a means to determine the effects of minor amounts of hypergolic fluids, such as a splash, on materials such as plastics, foams, adhesives, coatings, composites, elastomers, fabrics, coated fabrics, ... -
KSC-NE-9187
Abstract: This document's scope is limited to measurements being utilized at KSC in ground support equipment. This set of guidelines has been developed by the NASA KSC Instrumentation Branch of the Engineering Directorate. It is ... -
KSC-S-126 REV B
Abstract: Introduction
This specification defines four grades of seals for noncryogenic use in the design of electrical components and their assemblies, containers, and equipment used in ground support equipment ... -
KSC-SPEC-E-0002A
Abstract: This specification establishes the general characteristics, construction, and material requirements for industrial/commercial racks and enclosures for use by KSC designers as components of facility support systems (FSS), ...