درباره ما
API TR 17TR6
Attributes of Production Chemicals in Subsea Production Systems - First Edition
Organization:
API - American Petroleum Institute
Year: 2012
Abstract: This document identifies and specifies the essential attributes of production chemicals intended to be introduced to subsea oil and gas production systems.
The document is intended for use by chemical suppliers to facilitate the provision of chemicals compatible with existing and intended subsea production systems (SPS) although it is envisaged that use of the document for specification purposes by the operators of such processes, will assist in ensuring the completeness of requests to supply.
The application of the document requires acceptance of the principle that it is the supplier's responsibility to ensure that the chemicals supplied are fit for purpose and safe to use, although it is acknowledged that this responsibility can only be fulfilled if specification of requirements is complete. To this end the document identifies essential information that only SPS designers and operators can provide but without knowledge of which, suppliers should not supply. In the requirements of this document, responsibility for obtaining these items of critical information is placed upon the supplier, in the expectation that designers and operators will respond with their ready provision.
The functional performance of production chemicals is outside the scope of this document.
The assessments and tests specified in this document are not intended to qualify materials for use in an SPS in respect of pressure containment, mechanical load, cyclic mechanical load, or other design parameters.
The chemical-chemical compatibility of production chemicals at their respective application concentrations is also outside the scope of this document as is the effect of any incompatibility on their respective functional performance.
Finally, this document does not consider the health, safety, or environmental (HS&E) implications of deploying a production chemical in an SPS.
NOTE Attention is drawn to the fact that the tests specified in this document can generate data and information about the effect of a chemical/material incompatibility on the integrity of a material used in a SPS, that could necessitate additional testing, outside the scope of this document. Such additional testing should however be undertaken in order to ensure that all possible mechanisms that could threaten the integrity of a production, transportation, or chemical injection system are fully evaluated.
The document is intended for use by chemical suppliers to facilitate the provision of chemicals compatible with existing and intended subsea production systems (SPS) although it is envisaged that use of the document for specification purposes by the operators of such processes, will assist in ensuring the completeness of requests to supply.
The application of the document requires acceptance of the principle that it is the supplier's responsibility to ensure that the chemicals supplied are fit for purpose and safe to use, although it is acknowledged that this responsibility can only be fulfilled if specification of requirements is complete. To this end the document identifies essential information that only SPS designers and operators can provide but without knowledge of which, suppliers should not supply. In the requirements of this document, responsibility for obtaining these items of critical information is placed upon the supplier, in the expectation that designers and operators will respond with their ready provision.
The functional performance of production chemicals is outside the scope of this document.
The assessments and tests specified in this document are not intended to qualify materials for use in an SPS in respect of pressure containment, mechanical load, cyclic mechanical load, or other design parameters.
The chemical-chemical compatibility of production chemicals at their respective application concentrations is also outside the scope of this document as is the effect of any incompatibility on their respective functional performance.
Finally, this document does not consider the health, safety, or environmental (HS&E) implications of deploying a production chemical in an SPS.
NOTE Attention is drawn to the fact that the tests specified in this document can generate data and information about the effect of a chemical/material incompatibility on the integrity of a material used in a SPS, that could necessitate additional testing, outside the scope of this document. Such additional testing should however be undertaken in order to ensure that all possible mechanisms that could threaten the integrity of a production, transportation, or chemical injection system are fully evaluated.
Collections
:
Show full item record
| contributor author | API - American Petroleum Institute | |
| date accessioned | 2017-09-04T17:55:05Z | |
| date available | 2017-09-04T17:55:05Z | |
| date copyright | 2012.03.01 | |
| date issued | 2012 | |
| identifier other | FIYPUEAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/178217 | |
| description abstract | This document identifies and specifies the essential attributes of production chemicals intended to be introduced to subsea oil and gas production systems. The document is intended for use by chemical suppliers to facilitate the provision of chemicals compatible with existing and intended subsea production systems (SPS) although it is envisaged that use of the document for specification purposes by the operators of such processes, will assist in ensuring the completeness of requests to supply. The application of the document requires acceptance of the principle that it is the supplier's responsibility to ensure that the chemicals supplied are fit for purpose and safe to use, although it is acknowledged that this responsibility can only be fulfilled if specification of requirements is complete. To this end the document identifies essential information that only SPS designers and operators can provide but without knowledge of which, suppliers should not supply. In the requirements of this document, responsibility for obtaining these items of critical information is placed upon the supplier, in the expectation that designers and operators will respond with their ready provision. The functional performance of production chemicals is outside the scope of this document. The assessments and tests specified in this document are not intended to qualify materials for use in an SPS in respect of pressure containment, mechanical load, cyclic mechanical load, or other design parameters. The chemical-chemical compatibility of production chemicals at their respective application concentrations is also outside the scope of this document as is the effect of any incompatibility on their respective functional performance. Finally, this document does not consider the health, safety, or environmental (HS&E) implications of deploying a production chemical in an SPS. NOTE Attention is drawn to the fact that the tests specified in this document can generate data and information about the effect of a chemical/material incompatibility on the integrity of a material used in a SPS, that could necessitate additional testing, outside the scope of this document. Such additional testing should however be undertaken in order to ensure that all possible mechanisms that could threaten the integrity of a production, transportation, or chemical injection system are fully evaluated. | |
| language | English | |
| title | API TR 17TR6 | num |
| title | Attributes of Production Chemicals in Subsea Production Systems - First Edition | en |
| type | standard | |
| page | 54 | |
| status | Active | |
| tree | API - American Petroleum Institute:;2012 | |
| contenttype | fulltext |