JSA JIS K 6256-2

Abstract

This Standard specifies the determination method of the adhesion strength of assembled component comprising vulcanized rubber or thermoplastic rubber bonded to a rigid substrate. The test is carried out at a peel angle of 90&#176;. <br>This Standard is not applicable to vulcanized rubber or thermoplastic rubber of 85 IRHD or more in hardness. <br>NOTE: The International Standard corresponding to this Standard and the symbol of degree of correspondence are as follows: <br>ISO 813 : 2010 <em>Rubber, vulcanized or thermoplastic - Determination of adhesion to a rigid substrate - 90&#176; peel method (<strong>MOD</strong>)</em> <br>The symbols which denote the degree of correspondence in the contents between the relevant International Standard and <strong>JIS</strong> are <strong>IDT</strong> (identical), <strong>MOD</strong> (modified), and <strong>NEQ</strong> (not equivalent) according to <strong>ISOIIEC Guide 21-1</strong>. <br><strong>WARNING</strong> Persons using this Standard should be familiar with normal laboratory practice. This Standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices.