درباره ما
ASME - ASME International: Recent submissions
Now showing items 721-740 of 1083
-
ASME B29.400
Abstract: This Standard is a consolidation of two ASME standards, ASME B29.11M-1994 (Combination Chains, Attachments, and Sprocket Teeth) and ASME B29.14M-1996 ("H" Type Mill Chains, Attachments, and Sprocket Teeth). These two ... -
ASME A112.19.14
Abstract: This Standard establishes physical, material, testing, and marking requirements for 6 L water closets that incorporate a water-conserving, dual-flushing feature into the fixture. The tests specified in this Standard are ... -
ASME PTC 19.1
Abstract: GENERAL
Most Sections in this revision of ASME PTC 19.1-2005 [1] are rewritten to both add to the available technology for uncertainty analysis and to make it easier for the practicing engineer. ... -
ASME A112.19.9M
Abstract: SCOPE AND PURPOSE
This Standard covers physical requirements and test methods pertaining to material, grading, dimensions, certain features of construction, and types and sizes of plumbing fixtures of non-vitreous ... -
ASME STP-PT-033
Abstract: This report is a review of the literature on post weld heat treatment of steels used in ASME Code construction. Based on this review, recommendations are made for use by the ASME Code writing committees on issues that these ... -
ASME B5.11
Abstract: SCOPE AND PURPOSE
This standard is to provide the means for individual axial adjustment of drilling, reaming, and tapping tools, etc. in the spindles of single or multiple spindle heads.
Further, its ... -
ASME A112.19.2
Abstract: This Standard covers vitreous and non-vitreous china plumbing fixtures and specifies requirements for materials, construction, performance, testing, and markings. This Standard's performance requirements and test procedures ... -
ASME B30.11 INTERPRETATIONS
Abstract: Scope:
This publication includes all of the written replies issued between the indicated dates by the Secretary, speaking for the ASME B30 Committee, Safety Standards for Cableways, ... -
ASME HST-5
Abstract: (a) This Standard establishes performance requirements for air powered chain hoists for vertical lifting service involving material handling of freely suspended (unguided) loads using load chain of the roller or welded ... -
ASME B31.5
Abstract: Rules for this Code Section have been developed considering the needs for applications that include piping and heat transfer components for refrigerants and secondary coolants.
This Code prescribes requirements for the ... -
ASME B94.7
Abstract: This standard covers types, sizes, tolerances, marking and nomenclature for hobs of one-piece construction used for generating involute gears, involute splines, parallel side splines, involute serrations and roller chain ... -
ASME B31.9 INTERPRETATIONS
Abstract: This publication includes all written interpretations issued between the indicated dates by the B31 Committee in response to inquiries concerning interpretations of the Code. A contents is also included which lists ... -
ASME STP-NU-013
Abstract: INTRODUCTION
In the frame of the AREVA HTR-VHTR design, it is recommended to operate the Reactor Pressure Vessel (RPV) in the negligible creep regime in order to avoid the implementation of a surveillance ... -
ASME RAM-1
Abstract: This Standard provides the requirements to establish a RAM program for any power-generation facility. The program process includes
(a) establishment of RAM goals
(b) requirements for design, ... -
ASME 14414
Abstract: This International Standard sets the requirements for conducting and reporting the results of a pumping system energy assessment (hereafter referenced as "assessment") that considers the entire pumping system, from energy ... -
ASME A112.19.12
Abstract: This Standard establishes physical requirements and tests addressing structural strength; adjustments; materials; drain line hydraulics; and mechanical, material, testing, marking, and documentation requirements for wall ... -
ASME PTC 19.5
Abstract: This Supplement describes the techniques and methods of all flow measurements required or recommended 1 by the Performance Test Codes. Newer flow measurement techniques of comparably high accuracy are included to provide ... -
ASME EA-4
Abstract: This Standard covers compressed air systems, which are defined as a group of subsystems comprised of integrated sets of components, including air compressors, treatment equipment, controls, piping, pneumatic tools, ... -
ASME B5.55M
Abstract: SCOPE, PURPOSE, AND APPLICATION
The requirements of this Standard apply to those power operated press brakes that are used to form metal by bending. This Standard specifically excludes machines referred to as ... -
ASME PTC 19.3 TW
Abstract: This Standard applies to thermowells machined from bar stock and includes those welded to or threaded into a flange as well as those welded into a process vessel or pipe with or without a weld adaptor. Thermowells manufactured ...