درباره ما
ASME - ASME International: Recent submissions
Now showing items 701-720 of 1083
-
ASME A112.18.8
Abstract: This Standard establishes minimum requirements for materials in the construction of sanitary waste valves (hereinafter referred to as "the valve") for use as an alternate to tubular p-traps, and prescribes minimum test ... -
ASME A112.6.9
Abstract: This Standard establishes minimum requirements and provides guidelines for the proper design, installation, examination, and testing of siphonic roof drains. It includes definitions of terms and parameters involved in the ... -
ASME PTC 51
Abstract: This Code may be used for in situ testing of inlet airconditioning systems (cooling/heating) as they apply to gas turbines in simple, cogeneration, and combinedcycle applications. Cooling systems covered by this Code include ... -
ASME B73.2
Abstract: This Standard covers motor-driven centrifugal pumps of vertical shaft, single stage design with suction and discharge nozzles in line. It includes dimensional interchangeability requirements and certain design features to ... -
ASME PTC 4.3
Abstract: This Code applies specifically to the regenerative and tubular type air heaters. It also applies to any combustion gas-to-air heat exchangers used in conjunction with a steam generator. -
ASME STP-PT-028
Abstract: INTRODUCTION
This study investigated the impact test exemption curves of ASME Section VIII, UCS-66, with the objective of extending them to thicknesses representative of piping components. Specifically, ... -
ASME B18.29.1
Abstract: This Standard delineates the dimensional data for the inch series helical coil screw thread inserts and the threaded holes into which they are installed. Both free-running and screw-locking types having unified fine and ... -
ASME STP-NU-038
Abstract: This report will first review the different concepts of IHX that could be envisioned for HTR/VHTR applications in a range of temperature from 850 to 950°C. This will cover shell-and-tube and compact designs (including ... -
ASME STP-NU-045-1
Abstract: FOREWORD
The Roadmap has been developed as a guide to the R&D and Code development tasks that could be considered in developing rules for High Temperature Gas-Cooled Reactors (HTGR). The primary focus ... -
ASME PTC 22
Abstract: This Code provides for the testing of gas turbines supplied with gaseous or liquid fuels (or solid fuels converted to liquid or gas prior to entrance to the gas turbine). Tests of gas turbines with emission control and/or ... -
ASME B30.10 INTERPRETATIONS
Abstract: Scope:
This publication includes all of the written replies issued between the indicated dates by the Secretary, speaking for the ASME B30 Committee, Safety Standards for Cableways, ... -
ASME BPE
Abstract: SCOPE OF THE ASME BPE STANDARD
The ASME BPE Standard provides requirements for systems and components that are subject to cleaning and sanitization and/or sterilization including systems that are cleaned ... -
ASME B1.2
Abstract: Scope:
This Standard provides essential specifications and dimensions for the gages used on Unified inch screw threads (UN and UNR thread form), and covers the specifications and ... -
ASME QAI-1 INTERPRETATIONS
Abstract: Scope:
This publication includes all of the written replies issued between the indicated dates to inquiries concerning interpretations of ASME QAI-1, Qualifications for Authorized ... -
ASME PTC 12.4
Abstract: Requirements are specified by this Code for application on MSR testing in the following areas:
(a) Pretest arrangements and agreements;
(b) Instrumentation types and accuracies;
(c) Instrumentation ... -
ASME B31.8
Abstract: (a) This Code covers the design, fabrication, installation, inspection, and testing of pipeline facilities used for the transportation of gas. This Code also covers safety aspects of the operation and maintenance ... -
ASME Y14.100
Abstract: This Standard establishes the essential requirements and reference documents applicable to the preparation and revision of manual or computer-generated engineering drawings and associated lists, unless tailored by a specialty ... -
ASME B29.28
Abstract: This Standard covers roller chains that are specifically designed to withstand occasional high shock loads or high starting loads that are encountered in certain construction equipment and other severe-duty applications. ... -
ASME B30.28
Abstract: SCOPE OF ASME B30.28
Volume B30.28 includes provisions that apply to the marking, construction, installation, inspection, testing, maintenance, and operation of balance lifting units (balancers). ... -
ASME B5.8
Abstract: SCOPE AND PURPOSE
This Standard applies to chucks for use on engine lathes, tool room lathes, turret lathes, and automatic lathes and fit American Standard Spindle Noses of ANSI-B5.9-1967. They may be used on other ...