درباره ما
ASME - ASME International: Recent submissions
Now showing items 761-780 of 1083
-
ASME B94.52M
Abstract: This Standard provides a useful criterion of practice in production, distribution, and use of hacksaw products. It was developed to provide blades that will meet all normal requirements of consumers. Section 3, Definitions, ... -
ASME PTC 50
Abstract: OBJECT AND SCOPE
This Code applies to all fuel cell power systems regardless of the electrical power output, thermal output, fuel cell type, fuel type, or system application.
Fuel cell power systems ... -
ASME B1.1
Abstract: This Standard specifies the thread form, series, class, allowance, tolerance, and designation for unified screw threads. (In order to emphasize that unified screw threads are based on inch modules, they may be denoted ... -
ASME B29.17M
Abstract: Steel chains of the type covered by this Standard were first introduced in the late 1930s. These chains met with considerable success on material conveying applications.
In 1973, a subcommittee of American ... -
ASME CSD-1
Abstract: The rules of this Standard cover requirements for the assembly, installation, maintenance, and operation of controls and safety devices on automatically operated boilers directly fired with gas, oil, gas-oil, or electricity, ... -
ASME B18.3.3M
Abstract: This Standard contains complete dimensional, mechanical, and performance requirements for Metric Series Hexagon Socket Head Shoulder Screws with nominal shoulder diameters from 6.5 mm to 25 mm recognized as American National ... -
ASME B31.8
Abstract: (a) This Code covers the design, fabrication, installation, inspection, and testing of pipeline facilities used for the transportation of gas. This Code also covers safety aspects of the operation and maintenance of those ... -
ASME B16.10
Abstract: Application. This Standard covers face-to-face and end-to-end dimensions of straightway valves, and center-to-face and center-to-end dimensions of angle valves. Its purpose is to ensure installation ... -
ASME B18.21.1
Abstract: This Standard covers the dimensional requirements, physical properties, and related test methods for helical spring-lock washers (# 0 through 3 in.), tooth-lock washers (# 2 through 13⁄4 in.), ... -
ASME B16.1
Abstract: This Standard covers Classes 25, 125, and 250 Gray Iron Pipe Flanges and Flanged Fittings. It includes
(a) pressure–temperature ratings
(b) sizes and method of designating openings of reducing ... -
ASME PTC 19.23
Abstract: To prepare a compendium of techniques and methods for model testing. This general procedure is to serve as a guide for the design and application of models by those concerned with the extension or supplementation of ... -
ASME B89.4.10360.2
Abstract: This part of ISO 10360 specifies the acceptance tests for verifying the performance of a CMM used for measuring linear dimensions as stated by the manufacturer. It also specifies the reverification tests that enable the ... -
ASME B107.400
Abstract: This Standard provides performance and safety requirements for nail hammers that are intended specifically for use in driving or pulling unhardened nails and ripping apart or tearing down wooden components. It is intended ... -
ASME RA-S
Abstract: SCOPE AND APPLICABILITY
This Standard establishes requirements for a Level 1 PRA of internal and external events for all plant operating modes (low power and shutdown modes will be included at a future ... -
ASME B18.2.4.3M
Abstract: This standard covers the complete general and dimensional data for metric slotted hex nuts recognized as American National Standard.
The inclusion of dimensional data in this standard is not intended to imply ... -
ASME PVHO-2
Abstract: INTRODUCTION AND SCOPE
(a) This Standard provides technical requirements and guidelines for the operation and maintenance of PVHOs and PVHO systems that were designed, constructed, tested, and ... -
ASME B18.21.3
Abstract: This Standard covers the dimensional and physical properties and methods of testing for double coil helical spring lock washers for wood structures.
NOTE: The word lock appearing in the name of the product in this ... -
ASME B30.21
Abstract: The ASME B30 Standard contains provisions that apply to the construction, installation, operation, inspection, testing, maintenance, and use of cranes and other lifting and material-movement related equipment. For the ... -
ASME B89.4.22
Abstract: The scope of this Standard pertains to the performance evaluation of articulated arm coordinate measuring machines. While any number of rotational joints can be evaluated, the Standard focuses on the more common configurations ...