درباره ما
ASME - ASME International: Recent submissions
Now showing items 801-820 of 1083
-
ASME B29.300A
Abstract: On August 26, 1998, the B29 Standards committee agreed via letter ballot to consolidate and revise the following three chain standards: ASME B29.6, Steel Detachable Link Chains, Attachments, and Sprockets; ASME B29.19, ... -
ASME PCC-1
Abstract: The bolted flange joint assembly (BFJA) guidelines described in this document apply to pressure-boundary flanged joints with ring-type gaskets that are entirely within the circle enclosed by the bolt holes and with no ... -
ASME B30.29
Abstract: PURPOSE
The B30 Standard is intended to
(a) prevent or minimize injury to workers, and otherwise provide for the protection of life, limb, and property by prescribing safety requirements
(b) ... -
ASME FORGING A NEW NUCLEAR SAFETY CONSTRUCT
Abstract: WORKSHOP SUMMARY
The ASME Presidential Task Force on Response to Japan Nuclear Power Plant Events hosted a workshop on December 4‐5, 2012 at the Willard Intercontinental Hotel in Washington, DC. ... -
ASME A112.14.4
Abstract: This Standard establishes requirements for grease interceptors that are equipped with automatic grease removal devices (GRD). It includes testing requirements and performance criteria designed to ensure conformance to ... -
ASME B94.53
Abstract: This document specifies dimensions and tolerances in inches and millimeters for solid steel metal cutting squaring shear knives used for shearing ferrous and non-ferrous metals. The dimensions and tolerances together with ... -
ASME B16.39
Abstract: General
This Standard covers threaded malleable iron unions, Classes 150, 250, and 300. It also contains provisions for using steel for NPS 1⁄8 unions. This Standard includes ... -
ASME A112.19.5
Abstract: This Standard covers spuds and flush valves for water closet bowls, tanks, and urinals.
In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to ... -
ASME B30.17
Abstract: Volume B30.17 includes provisions that apply to the construction, installation, operation, inspection, and maintenance of hand-operated and power-driven overhead and gantry cranes that have a top-running singlegirder bridge, ... -
ASME A112.18.6
Abstract: This Standard covers flexible water connectors for use in water supply systems under
(a) continuous pressure in accessible locations; and
(b) intermittent pressure in recreational vehicles only
In this Standard, ... -
ASME B16.4
Abstract: This Standard for gray iron threaded fittings, Classes 125 and 250, covers
(a) pressure–temperature ratings
(b) sizes and method of designating openings of reducing fittings
(c) ... -
ASME B31Q
Abstract: This Standard establishes the requirements for developing and implementing an effective Pipeline Personnel Qualification Program (qualification program) utilizing a combination of technically based data, accepted industry ... -
ASME B18.2.6M
Abstract: This Standard covers the complete general and dimensional data for products in the metric series recognized as American National Standard for sizes M12 through M36. These four metric structural products include
(a) ... -
ASME MFC-3M
Abstract: This Standard specifies the geometry and method of use (installation and operating conditions) for pressure differential devices (including, but not limited to, orifice plates, flow nozzles, and venturi tubes) when installed ... -
ASME STP-SA-030
Abstract: The content of this report evaluates variances between Federation Europeenne de la Manutention (FEM) Automated Storage and Retrieval System (ASRS) standards and ASME B30.13 2003 Storage/Retrieval (S/R) Machines and Associated ... -
ASME B18.2.6
Abstract: This Standard covers the complete general and dimensional data for five products in the inch series recognized as an American National Standard. These five structural products include
(a) Heavy Hex Structural ... -
ASME Y14.34
Abstract: This Standard establishes the minimum requirements for the preparation and revision of application lists, data lists, index lists, parts lists, and wire lists. In addition, this Standard presents certain options that may ... -
ASME STP-NU-035
Abstract: This work was undertaken in support of the ASME/DOE Generation IV Reactor Materials Program [1]. Most of the advanced nuclear reactor concepts being considered in the Generation IV effort will require that the structural ... -
ASME OM CODE CASES
Abstract: This Code Case establishes the requirements for preservice and inservice testing to assess the operational readiness of active motor-operated valves (MOVs) in light-water reactor (LWR) power plants.
The MOVs covered ...