SMD-5962-92284

DLA - CC - DLA Land and Maritime

MICROCIRCUIT, DIGITAL, CMOS, 32-BIT RISC MICROPROCESSOR, MONOLITHIC SILICON

Organization:

Year: 1993

Abstract: This drawing forms a part of a one part - one part number documentation system (see 6.6 herein). Two product assurance classes consisting of military high reliability (device classes B, Q, and M) and space application (device classes S and V), and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). Device class M microcircuits represent non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices". When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN.
The PIN shall be as shown in the following example:

Device classes M, B, and S RHA marked devices shall meet the MIL-M-38510 specified RHA levels and shall be marked with the appropriate RHA designator. Device classes Q and V RHA marked devices shall meet the MIL-I-38535 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type(s) shall identify the circuit function as follows:

    Device type     Generic number              Circuit function                          Speed          01              29000           32 Bit streamlined instruction processor           20 MHz         02              29000           32 Bit streamlined instruction processor           16 MHz

The device class designator shall be a single letter identifying the product assurance level as follows:

           Device class                                     Device requirements documentation                  M                             Vendor self-certification to the requirements for non-JAN class B                                               microcircuits in accordance with 1.2.1 of MIL-STD-883                B or S                          Certification and qualification to MIL-M-38510                Q or V                          Certification and qualification to MIL-I-38535

The case outline(s) shall be as designated in MIL-STD-1835 and as follows:

    Outline letter          Descriptive designator           Terminals                Package style            Z                        CMGA9-P169                   169                  Pin grid array

The lead finish shall be as specified in MIL-M-38510 for classes M, B, and S or MIL-I-38535 for classes Q and V. Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference.

     Supply voltage range . . . . . . . . . . . . . . . . . . .   +4.5 V dc to +5.5 V dc      Input voltage range  . . . . . . . . . . . . . . . . . . .   −0.5 to V_CC +0.5 V dc      Storage temperature range  . . . . . . . . . . . . . . . .   −65°C to +150°C      Maximum power dissipation (P_D) 2/. . . . . . . . . . . . . .   3.3 W      Lead temperature (soldering, 10 seconds) . . . . . . . . .   300°C      Thermal resistance, junction-to-case (θ_JC):        Case Z . . . . . . . . . . . . . . . . . . . . . . . . .   See MIL-STD-1835      Junction temperature (T_J)  . . . . . . . . . . . . . . . .   131.6°C

     Supply voltage (V_CC) . . . . . . . . . . . . . . . . . . .   +4.5 V dc to +5.5 V dc      Minimum high-level input voltage (V_IH) . . . . . . . . . .   2.0 V dc      Maximum low-level input voltage (V_IL)  . . . . . . . . . .   0.8 V dc      Case operating temperature range (T_C)  . . . . . . . . . .   −55°C to +125°C      Maximum low-level SYSCLK input voltage        (V_ILSYSCLK)  . . . . . . . . . . . . . . . . . . . . . .   +0.8 V dc      Minimum high-level SYSCLK input voltage        (V_IHSYSCLK)  . . . . . . . . . . . . . . . . . . . . . .   V_CC − 0.8 V dc

     Fault coverage measurement of manufacturing        logic tests (MIL-STD-883, test method 5012)  . . . . . .   XX percent 3/

Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device classes B and Q devices will replace device class M devices.

URI: https://yse.yabesh.ir/std/handle/yse/182177

Collections :

DLA - CC - DLA Land and Maritime

Show full item record

contributor author	DLA - CC - DLA Land and Maritime
date accessioned	2017-09-04T17:59:06Z
date available	2017-09-04T17:59:06Z
date copyright	03/18/1993
date issued	1993
identifier other	FTDXDAAAAAAAAAAA.pdf
identifier uri	https://yse.yabesh.ir/std/handle/yse/182177
description abstract	This drawing forms a part of a one part - one part number documentation system (see 6.6 herein). Two product assurance classes consisting of military high reliability (device classes B, Q, and M) and space application (device classes S and V), and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). Device class M microcircuits represent non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices". When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN. The PIN shall be as shown in the following example: Device classes M, B, and S RHA marked devices shall meet the MIL-M-38510 specified RHA levels and shall be marked with the appropriate RHA designator. Device classes Q and V RHA marked devices shall meet the MIL-I-38535 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. The device type(s) shall identify the circuit function as follows: Device type Generic number Circuit function Speed 01 29000 32 Bit streamlined instruction processor 20 MHz 02 29000 32 Bit streamlined instruction processor 16 MHz The device class designator shall be a single letter identifying the product assurance level as follows: Device class Device requirements documentation M Vendor self-certification to the requirements for non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883 B or S Certification and qualification to MIL-M-38510 Q or V Certification and qualification to MIL-I-38535 The case outline(s) shall be as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style Z CMGA9-P169 169 Pin grid array The lead finish shall be as specified in MIL-M-38510 for classes M, B, and S or MIL-I-38535 for classes Q and V. Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference. Supply voltage range . . . . . . . . . . . . . . . . . . . +4.5 V dc to +5.5 V dc Input voltage range . . . . . . . . . . . . . . . . . . . −0.5 to V_CC +0.5 V dc Storage temperature range . . . . . . . . . . . . . . . . −65°C to +150°C Maximum power dissipation (P_D) 2/. . . . . . . . . . . . . . 3.3 W Lead temperature (soldering, 10 seconds) . . . . . . . . . 300°C Thermal resistance, junction-to-case (θ_JC): Case Z . . . . . . . . . . . . . . . . . . . . . . . . . See MIL-STD-1835 Junction temperature (T_J) . . . . . . . . . . . . . . . . 131.6°C Supply voltage (V_CC) . . . . . . . . . . . . . . . . . . . +4.5 V dc to +5.5 V dc Minimum high-level input voltage (V_IH) . . . . . . . . . . 2.0 V dc Maximum low-level input voltage (V_IL) . . . . . . . . . . 0.8 V dc Case operating temperature range (T_C) . . . . . . . . . . −55°C to +125°C Maximum low-level SYSCLK input voltage (V_ILSYSCLK) . . . . . . . . . . . . . . . . . . . . . . +0.8 V dc Minimum high-level SYSCLK input voltage (V_IHSYSCLK) . . . . . . . . . . . . . . . . . . . . . . V_CC − 0.8 V dc Fault coverage measurement of manufacturing logic tests (MIL-STD-883, test method 5012) . . . . . . XX percent 3/ Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device classes B and Q devices will replace device class M devices.
language	English
title	SMD-5962-92284	num
title	MICROCIRCUIT, DIGITAL, CMOS, 32-BIT RISC MICROPROCESSOR, MONOLITHIC SILICON	en
type	standard
page	27
status	Active
tree	DLA - CC - DLA Land and Maritime:;1993
contenttype	fulltext