درباره ما
AASHTO T 136
Standard Method of Test for Freezing-and-Thawing Tests of Compacted Soil-Cement Mixtures
| contributor author | AASHTO - American Association of State Highway and Transportation Officials | |
| date accessioned | 2017-09-04T18:01:15Z | |
| date available | 2017-09-04T18:01:15Z | |
| date copyright | 2013.01.01 | |
| date issued | 2013 | |
| identifier other | FYWVJFAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/184346 | |
| description abstract | These methods cover procedures for determining the soil-cement losses, moisture changes, and volume changes (swell and shrinkage) produced by the repeated freezing and thawing of hardened soil-cement specimens. The specimens are compacted in a mold, before cement hydration, to maximum density at optimum moisture content using the compaction procedure described in T 134. Two methods depending on soil gradation are covered for preparation of material for molding specimens and molding specimens as follows: Method A-Using soil material passing the 4.75-mm (No. 4) sieve. This method shall be used when 100 percent of the soil sample passes the 4.75-mm (No. 4) sieve. (See Sections 4 to 6.) Method B-Using soil material passing the 19.0-mm (¾-in.) sieve. This method shall be used when part of the soil sample is retained on the 4.75-mm sieve. (See Sections 7 to 9.) The values stated in SI units are to be regarded as the standard. | |
| language | English | |
| title | AASHTO T 136 | num |
| title | Standard Method of Test for Freezing-and-Thawing Tests of Compacted Soil-Cement Mixtures | en |
| type | standard | |
| page | 8 | |
| status | Active | |
| tree | AASHTO - American Association of State Highway and Transportation Officials:;2013 | |
| contenttype | fulltext |
