درباره ما
CSA CAN/CSA-C22.2 NO. 60947-1-13
Low-Voltage Switchgear and Controlgear - Part 1: General rules - Second Edition
Organization:
CSA - CSA Group
Year: 2013
Abstract: Scope and object This standard applies, when required by the relevant product standard, to switchgear and controlgear hereinafter referred to as ²equipment² and intended to be connected to circuits, the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c.
It does not apply to low-voltage switchgear and controlgear assemblies which are dealt with in IEC 60439.
NOTE – In certain clauses or subclauses of this standard, the equipment covered by this standard is also referred to as ²device², to be consistent with the text of such clauses or subclauses.
The object of this standard is to state those general rules and requirements which are common to low-voltage equipment as defined in 1.1, including for example:
– definitions;
– characteristics;
– information supplied with the equipment;
– normal service, mounting and transport conditions;
– constructional and performance requirements;
– verification of characteristics and performance.
Digital inputs and/or digital outputs contained in switchgear and controlgear, and intended to be compatible with programmable controllers (PLCs) are covered by Annex S.
It does not apply to low-voltage switchgear and controlgear assemblies which are dealt with in IEC 60439.
NOTE – In certain clauses or subclauses of this standard, the equipment covered by this standard is also referred to as ²device², to be consistent with the text of such clauses or subclauses.
The object of this standard is to state those general rules and requirements which are common to low-voltage equipment as defined in 1.1, including for example:
– definitions;
– characteristics;
– information supplied with the equipment;
– normal service, mounting and transport conditions;
– constructional and performance requirements;
– verification of characteristics and performance.
Digital inputs and/or digital outputs contained in switchgear and controlgear, and intended to be compatible with programmable controllers (PLCs) are covered by Annex S.
Collections
:
-
Statistics
CSA CAN/CSA-C22.2 NO. 60947-1-13
Show full item record
| contributor author | CSA - CSA Group | |
| date accessioned | 2017-09-04T18:02:54Z | |
| date available | 2017-09-04T18:02:54Z | |
| date copyright | 2013.07.31 | |
| date issued | 2013 | |
| identifier other | GCVYFFAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/185813 | |
| description abstract | Scope and object This standard applies, when required by the relevant product standard, to switchgear and controlgear hereinafter referred to as ²equipment² and intended to be connected to circuits, the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c. It does not apply to low-voltage switchgear and controlgear assemblies which are dealt with in IEC 60439. NOTE – In certain clauses or subclauses of this standard, the equipment covered by this standard is also referred to as ²device², to be consistent with the text of such clauses or subclauses. The object of this standard is to state those general rules and requirements which are common to low-voltage equipment as defined in 1.1, including for example: – definitions; – characteristics; – information supplied with the equipment; – normal service, mounting and transport conditions; – constructional and performance requirements; – verification of characteristics and performance. Digital inputs and/or digital outputs contained in switchgear and controlgear, and intended to be compatible with programmable controllers (PLCs) are covered by Annex S. | |
| language | English | |
| title | CSA CAN/CSA-C22.2 NO. 60947-1-13 | num |
| title | Low-Voltage Switchgear and Controlgear - Part 1: General rules - Second Edition | en |
| type | standard | |
| page | 320 | |
| status | Active | |
| tree | CSA - CSA Group:;2013 | |
| contenttype | fulltext |