درباره ما
MIL-STD-1678-4
FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS (Part 4: TEST SAMPLE CONFIGURATION AND FABRICATION REQUIREMENTS)
Organization:
DLA - CC - DLA Land and Maritime
Year: 2010
Abstract: Part 4 of this standard practice augments the specified fabrication method to ensure consistency with use of the same components (such as cable types) and processes. Mainly, this augmentation provides details to refine or bound (constrict) the requirements for the test sample configuration and fabrication. This part of the standard practice test sample may be referred to as Device Under Test or DUT in this Standard Practice.
Applicability. The test sample configuration and fabrication, such as those in a TIA-455 series standard or military standard/specification, are cited elsewhere. This part of the standard practice augments by further refining or bounding the requirements found in the TIA-455 series standard or military standard/specification to ensure consistency with test sample configuration and fabrication. This consistency minimizes variations when comparing data obtained from different test laboratories (including commercial, vendor, Government, and Government contractor) and product from different vendors. The rapidly changing state of the art in fiber optic technology makes it essential that some degree of flexibility be exercised in enforcing this document. When there is a conflict between this document and the platform specification or contract, the platform specification or contract shall take precedence. Where obsolescence or other issues are such that the configuration or fabrication requirements specified for the refinement or bound (constraint) herein cannot be implemented, users shall submit a description of the issue along with a request for clarification or with proposal for redefining the requirement to consider for incorporation into this standard practice to: Defense Supply Center Columbus, ATTN: VAT, Post Office Box 3990, Columbus, OH 43218-3990, or emailed to FiberOpticGroup@dla.mil.Intended Use: The test sample configurations and fabrication requirements depicted in this standard practice are intended for qualification testing; however, they are applicable for other types of test or evaluation programs that require citing the configuration and fabrication for fiber optic cabling components used on military mobile vehicles also identified as platforms.
Applicability. The test sample configuration and fabrication, such as those in a TIA-455 series standard or military standard/specification, are cited elsewhere. This part of the standard practice augments by further refining or bounding the requirements found in the TIA-455 series standard or military standard/specification to ensure consistency with test sample configuration and fabrication. This consistency minimizes variations when comparing data obtained from different test laboratories (including commercial, vendor, Government, and Government contractor) and product from different vendors. The rapidly changing state of the art in fiber optic technology makes it essential that some degree of flexibility be exercised in enforcing this document. When there is a conflict between this document and the platform specification or contract, the platform specification or contract shall take precedence. Where obsolescence or other issues are such that the configuration or fabrication requirements specified for the refinement or bound (constraint) herein cannot be implemented, users shall submit a description of the issue along with a request for clarification or with proposal for redefining the requirement to consider for incorporation into this standard practice to: Defense Supply Center Columbus, ATTN: VAT, Post Office Box 3990, Columbus, OH 43218-3990, or emailed to FiberOpticGroup@dla.mil.Intended Use: The test sample configurations and fabrication requirements depicted in this standard practice are intended for qualification testing; however, they are applicable for other types of test or evaluation programs that require citing the configuration and fabrication for fiber optic cabling components used on military mobile vehicles also identified as platforms.
Subject: Fiber optic cabling
Collections
:
Show full item record
| contributor author | DLA - CC - DLA Land and Maritime | |
| date accessioned | 2017-09-04T18:07:30Z | |
| date available | 2017-09-04T18:07:30Z | |
| date copyright | 05/28/2010 | |
| date issued | 2010 | |
| identifier other | GOZFSCAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/190394 | |
| description abstract | Part 4 of this standard practice augments the specified fabrication method to ensure consistency with use of the same components (such as cable types) and processes. Mainly, this augmentation provides details to refine or bound (constrict) the requirements for the test sample configuration and fabrication. This part of the standard practice test sample may be referred to as Device Under Test or DUT in this Standard Practice. Applicability. The test sample configuration and fabrication, such as those in a TIA-455 series standard or military standard/specification, are cited elsewhere. This part of the standard practice augments by further refining or bounding the requirements found in the TIA-455 series standard or military standard/specification to ensure consistency with test sample configuration and fabrication. This consistency minimizes variations when comparing data obtained from different test laboratories (including commercial, vendor, Government, and Government contractor) and product from different vendors. The rapidly changing state of the art in fiber optic technology makes it essential that some degree of flexibility be exercised in enforcing this document. When there is a conflict between this document and the platform specification or contract, the platform specification or contract shall take precedence. Where obsolescence or other issues are such that the configuration or fabrication requirements specified for the refinement or bound (constraint) herein cannot be implemented, users shall submit a description of the issue along with a request for clarification or with proposal for redefining the requirement to consider for incorporation into this standard practice to: Defense Supply Center Columbus, ATTN: VAT, Post Office Box 3990, Columbus, OH 43218-3990, or emailed to FiberOpticGroup@dla.mil.Intended Use: The test sample configurations and fabrication requirements depicted in this standard practice are intended for qualification testing; however, they are applicable for other types of test or evaluation programs that require citing the configuration and fabrication for fiber optic cabling components used on military mobile vehicles also identified as platforms. | |
| language | English | |
| title | MIL-STD-1678-4 | num |
| title | FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS (Part 4: TEST SAMPLE CONFIGURATION AND FABRICATION REQUIREMENTS) | en |
| type | standard | |
| page | 34 | |
| status | Active | |
| tree | DLA - CC - DLA Land and Maritime:;2010 | |
| contenttype | fulltext | |
| subject keywords | Fiber optic cabling | |
| subject keywords | Test sample configuration | |
| subject keywords | Test sample fabrication requirements |