• 0
    • ارسال درخواست
    • حذف همه
    • Industrial Standards
    • Defence Standards
  • درباره ما
  • درخواست موردی
  • فهرست استانداردها
    • Industrial Standards
    • Defence Standards
  • راهنما
  • Login
  • لیست خرید شما 0
    • ارسال درخواست
    • حذف همه
View Item 
  •   YSE
  • Industrial Standards
  • ASHRAE - American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.
  • View Item
  •   YSE
  • Industrial Standards
  • ASHRAE - American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.
  • View Item
  • All Fields
  • Title(or Doc Num)
  • Organization
  • Year
  • Subject
Advanced Search
JavaScript is disabled for your browser. Some features of this site may not work without it.

Archive

ASHRAE LO-09-084

Experimental and Numerical Study of Airflows in a Full-Scale Room

Organization:
ASHRAE - American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.
Year: 2009

Abstract: ABSTRACT
This paper describes the experimental and numerical investigation of airflows in a full-scale ventilated room. The Volumetric Particle Streak-Tracking Velocimetry (VPSTV) was used to measure the three spatial components of air velocities at three ventilation rates: 3 ach, 8.6 ach, and 19.5 ach (Air Change per Hour). Reattachment length and jet penetration length measured at seven different ventilation rates ranging from 3 ach to 100 ach were also reported. The data obtained from the experiments were used to validate different numerical models, including turbulence models based on the Reynolds- Averaged Navier-Stokes (RANS) method and the Large Eddy Simulation (LES) with dynamical subgrid model. It was observed that one primary central recirculation vortex was formed in the middle of the room and one secondary small vortex existed near the left bottom corner. The sizes and positions of the two vortices varied with the ventilation rates: the central vortex became fuller and moved towards the center of the room with increasing ventilation rates; on the other hand, the secondary vortex became smaller and moved toward the left bottom corner. The reattachment length and jet penetration length showed a strong dependence on the ventilation rates and became relatively constant once the ventilation rate reached a threshold value of 19.5 ach. The LES generated the best predictions for the three ventilation rates while Reynolds Stress Model (RSM) predictions were closest to measurements among the RANS models. The outcome of the study will allow scientists to gain a better understanding of airflows and be useful in designing better ventilation systems that will improve the air quality and human health in indoor environments, such as offices, aircraft cabins, and other working environments.
URI: https://yse.yabesh.ir/std/handle/yse/193357
Collections :
  • ASHRAE - American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.
  • Download PDF : (1.115Mb)
  • Show Full MetaData Hide Full MetaData
  • Statistics

    ASHRAE LO-09-084

Show full item record

contributor authorASHRAE - American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.
date accessioned2017-09-04T18:10:19Z
date available2017-09-04T18:10:19Z
date copyright01/01/2009
date issued2009
identifier otherGWYXPCAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/193357
description abstractABSTRACT
This paper describes the experimental and numerical investigation of airflows in a full-scale ventilated room. The Volumetric Particle Streak-Tracking Velocimetry (VPSTV) was used to measure the three spatial components of air velocities at three ventilation rates: 3 ach, 8.6 ach, and 19.5 ach (Air Change per Hour). Reattachment length and jet penetration length measured at seven different ventilation rates ranging from 3 ach to 100 ach were also reported. The data obtained from the experiments were used to validate different numerical models, including turbulence models based on the Reynolds- Averaged Navier-Stokes (RANS) method and the Large Eddy Simulation (LES) with dynamical subgrid model. It was observed that one primary central recirculation vortex was formed in the middle of the room and one secondary small vortex existed near the left bottom corner. The sizes and positions of the two vortices varied with the ventilation rates: the central vortex became fuller and moved towards the center of the room with increasing ventilation rates; on the other hand, the secondary vortex became smaller and moved toward the left bottom corner. The reattachment length and jet penetration length showed a strong dependence on the ventilation rates and became relatively constant once the ventilation rate reached a threshold value of 19.5 ach. The LES generated the best predictions for the three ventilation rates while Reynolds Stress Model (RSM) predictions were closest to measurements among the RANS models. The outcome of the study will allow scientists to gain a better understanding of airflows and be useful in designing better ventilation systems that will improve the air quality and human health in indoor environments, such as offices, aircraft cabins, and other working environments.
languageEnglish
titleASHRAE LO-09-084num
titleExperimental and Numerical Study of Airflows in a Full-Scale Roomen
typestandard
page20
statusActive
treeASHRAE - American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.:;2009
contenttypefulltext
DSpace software copyright © 2017-2020  DuraSpace
نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
yabeshDSpacePersian
 
DSpace software copyright © 2017-2020  DuraSpace
نرم افزار کتابخانه دیجیتال "دی اسپیس" فارسی شده توسط یابش برای کتابخانه های ایرانی | تماس با یابش
yabeshDSpacePersian