درباره ما
UL 1332
UL Standard for Safety Organic Coatings for Steel Enclosures for Outdoor Use Electrical Equipment - Fourth Edition; Reprint with Revisions through and Including June 3, 2010
Organization:
UL - UL
Year: 2005
Abstract: These requirements cover tests of opaque and clear organic coatings intended for application to exterior and interior surfaces of steel enclosures of outdoor-use electrical equipment for protection of the metal against atmospheric corrosion.
These requirements cover organic coatings consisting of one or more coats and their system of application to steel or zinc-coated steel with specified pretreatment, application, bake or cure schedule, and minimum dry-film thickness.
The final acceptance of a coating is dependent upon its use in a complete product that complies with the requirements in the standard applicable to such a product.
The requirements may be applied to other organic or nonmetallic coatings if found to be appropriate.
The flammability or toxicity risks associated with the coating materials in any form, or the acceptability of the materials for uses other than indicated, are not within the scope of these requirements.
A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of fire, electric shock, or injury to persons shall be evaluated using the appropriate additional component and end-product requirements as determined necessary to maintain the acceptable level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this standard cannot be judged to comply with this standard. Where considered appropriate, revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard.
These requirements cover organic coatings consisting of one or more coats and their system of application to steel or zinc-coated steel with specified pretreatment, application, bake or cure schedule, and minimum dry-film thickness.
The final acceptance of a coating is dependent upon its use in a complete product that complies with the requirements in the standard applicable to such a product.
The requirements may be applied to other organic or nonmetallic coatings if found to be appropriate.
The flammability or toxicity risks associated with the coating materials in any form, or the acceptability of the materials for uses other than indicated, are not within the scope of these requirements.
A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of fire, electric shock, or injury to persons shall be evaluated using the appropriate additional component and end-product requirements as determined necessary to maintain the acceptable level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this standard cannot be judged to comply with this standard. Where considered appropriate, revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard.
Collections
:
Show full item record
| contributor author | UL - UL | |
| date accessioned | 2017-09-04T18:12:44Z | |
| date available | 2017-09-04T18:12:44Z | |
| date copyright | 02/09/2005 | |
| date issued | 2005 | |
| identifier other | HDCGSCAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/195701 | |
| description abstract | These requirements cover tests of opaque and clear organic coatings intended for application to exterior and interior surfaces of steel enclosures of outdoor-use electrical equipment for protection of the metal against atmospheric corrosion. These requirements cover organic coatings consisting of one or more coats and their system of application to steel or zinc-coated steel with specified pretreatment, application, bake or cure schedule, and minimum dry-film thickness. The final acceptance of a coating is dependent upon its use in a complete product that complies with the requirements in the standard applicable to such a product. The requirements may be applied to other organic or nonmetallic coatings if found to be appropriate. The flammability or toxicity risks associated with the coating materials in any form, or the acceptability of the materials for uses other than indicated, are not within the scope of these requirements. A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of fire, electric shock, or injury to persons shall be evaluated using the appropriate additional component and end-product requirements as determined necessary to maintain the acceptable level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this standard cannot be judged to comply with this standard. Where considered appropriate, revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard. | |
| language | English | |
| title | UL 1332 | num |
| title | UL Standard for Safety Organic Coatings for Steel Enclosures for Outdoor Use Electrical Equipment - Fourth Edition; Reprint with Revisions through and Including June 3, 2010 | en |
| type | standard | |
| page | 18 | |
| status | Active | |
| tree | UL - UL:;2005 | |
| contenttype | fulltext |