SMD-5962-95803 REV A

DLA - CC - DLA Land and Maritime

MICROCIRCUIT, DIGITAL, RADIATION HARDENED, HIGH SPEED CMOS, NONINVERTING QUAD BUFFER WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON

Organization:

DLA - CC - DLA Land and Maritime

Year: 1998

Abstract: This appendix establishes minimum requirements for microcircuit die to be supplied under the Qualified Manufacturers List (QML) Program. QML microcircuit die meeting the requirements of MIL-PRF-38535 and the manufactures approved QM plan for use in monolithic microcircuits, multichip modules (MCMs), hybrids, electronic modules, or devices using chip and wire designs in accordance with MIL-PRF-38534 are specified herein. Two product assurance classes consisting of military high reliability (device class Q) and space application (device Class V) are reflected in the Part or Identification Number (PIN). When available a choice of Radiation Hardiness Assurance (RHA) levels are reflected in PIN.
The PIN shall be as shown in the following example:

Device classes Q and V RHA identified die shall meet the MIL-PRF-38535 specified RHA levels. A dash (-) indicates a non-RHA die.
The device type(s) shall identify the circuits functions as follows:

          Device type     Generic number     Circuit function                01             HCS125          Radiation hardened, SOS,                                              high speed CMOS, non-                                              inverting quad buffer with                                              three-state outputs.

          Device class     Device requirements documentation              Q or V         Certification and qualification to the die requirements of MIL-PRF-38535.

The die details designation shall be a unique letter which designates the die's physical dimensions, bonding pad location(s) and related electrical function(s), interface materials, and other assembly related information, for each product and variant supplied to this appendix.

               Die Types            Figure number                    01                      A-1

               Die Types            Figure number                    01                      A-1

               Die Types            Figure number                    01                      A-1

               Die Types            Figure number                    01                      A-1

See paragraph 1.3 within the body of this drawing for details.
See paragraph 1.4 within the body of this drawing for details.
Intended Use: Microcircuit die conforming to this drawing are intended for use in microcircuits built in accordance with MIL-PRF-38535 or MIL-PRF-38535 for government microcircuit applications (original equipment), design applications and logistics purposes.

URI: https://yse.yabesh.ir/std/handle/yse/198492

Collections :

DLA - CC - DLA Land and Maritime

Show full item record

contributor author	DLA - CC - DLA Land and Maritime
date accessioned	2017-09-04T18:15:32Z
date available	2017-09-04T18:15:32Z
date copyright	07/14/1998
date issued	1998
identifier other	HKRBEAAAAAAAAAAA.pdf
identifier uri	https://yse.yabesh.ir/std/handle/yse/198492
description abstract	This appendix establishes minimum requirements for microcircuit die to be supplied under the Qualified Manufacturers List (QML) Program. QML microcircuit die meeting the requirements of MIL-PRF-38535 and the manufactures approved QM plan for use in monolithic microcircuits, multichip modules (MCMs), hybrids, electronic modules, or devices using chip and wire designs in accordance with MIL-PRF-38534 are specified herein. Two product assurance classes consisting of military high reliability (device class Q) and space application (device Class V) are reflected in the Part or Identification Number (PIN). When available a choice of Radiation Hardiness Assurance (RHA) levels are reflected in PIN. The PIN shall be as shown in the following example: Device classes Q and V RHA identified die shall meet the MIL-PRF-38535 specified RHA levels. A dash (-) indicates a non-RHA die. The device type(s) shall identify the circuits functions as follows: Device type Generic number Circuit function 01 HCS125 Radiation hardened, SOS, high speed CMOS, non- inverting quad buffer with three-state outputs. Device class Device requirements documentation Q or V Certification and qualification to the die requirements of MIL-PRF-38535. The die details designation shall be a unique letter which designates the die's physical dimensions, bonding pad location(s) and related electrical function(s), interface materials, and other assembly related information, for each product and variant supplied to this appendix. Die Types Figure number 01 A-1 Die Types Figure number 01 A-1 Die Types Figure number 01 A-1 Die Types Figure number 01 A-1 See paragraph 1.3 within the body of this drawing for details. See paragraph 1.4 within the body of this drawing for details. Intended Use: Microcircuit die conforming to this drawing are intended for use in microcircuits built in accordance with MIL-PRF-38535 or MIL-PRF-38535 for government microcircuit applications (original equipment), design applications and logistics purposes.
language	English
title	SMD-5962-95803 REV A	num
title	MICROCIRCUIT, DIGITAL, RADIATION HARDENED, HIGH SPEED CMOS, NONINVERTING QUAD BUFFER WITH THREE-STATE OUTPUTS, MONOLITHIC SILICON	en
type	standard
page	25
status	Active
tree	DLA - CC - DLA Land and Maritime:;1998
contenttype	fulltext