درباره ما
DIN EN ISO 527-5
English -- Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2009);
German -- Kunststoffe - Bestimmung der Zugeigenschaften - Teil 5: Pruefbedingungen fuer unidirektional faserverstaerkte Kunststoffverbundwerkstoffe (ISO 527-5:2009)
Organization:
DIN - Deutsches Institut für Normung e. V.
Year: 2010
Abstract: This part of ISO 527 specifies the test conditions for the determination of the tensile properties of unidirectional fibre-reinforced plastic composites, based upon the general principles given in Part 1.
See ISO 527-1:1993, Subclause 1.2.
The test method is suitable for all polymer matrix systems reinforced with unidirectional fibres and which meet the requirements, including failure mode, set out in this part of ISO 527.
The method is suitable for composites with either thermoplastic or thermosetting matrices, including preimpregnated materials (prepregs). The reinforcements covered include carbon fibres, glass fibres, aramid fibres and other similar fibres. The reinforcement geometries covered include unidirectional (i.e. completely aligned) fibres and rovings and unidirectional fabrics and tapes.
The method is not normally suitable for multidirectional materials composed of several unidirectional layers at different angles (see ISO 527-4).
The method is performed using one of two different types of test specimen, depending on the direction of the applied stress relative to the fibre direction (see Clause 6).
See ISO 527-1:1993, Subclause 1.5.
See ISO 527-1:1993, Subclause 1.2.
The test method is suitable for all polymer matrix systems reinforced with unidirectional fibres and which meet the requirements, including failure mode, set out in this part of ISO 527.
The method is suitable for composites with either thermoplastic or thermosetting matrices, including preimpregnated materials (prepregs). The reinforcements covered include carbon fibres, glass fibres, aramid fibres and other similar fibres. The reinforcement geometries covered include unidirectional (i.e. completely aligned) fibres and rovings and unidirectional fabrics and tapes.
The method is not normally suitable for multidirectional materials composed of several unidirectional layers at different angles (see ISO 527-4).
The method is performed using one of two different types of test specimen, depending on the direction of the applied stress relative to the fibre direction (see Clause 6).
See ISO 527-1:1993, Subclause 1.5.
Subject: Kunststoff
Collections
:
-
Statistics
DIN EN ISO 527-5
Show full item record
| contributor author | DIN - Deutsches Institut für Normung e. V. | |
| date accessioned | 2017-09-04T18:21:58Z | |
| date available | 2017-09-04T18:21:58Z | |
| date copyright | 2010.01.01 | |
| date issued | 2010 | |
| identifier other | IACTPCAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/204412 | |
| description abstract | This part of ISO 527 specifies the test conditions for the determination of the tensile properties of unidirectional fibre-reinforced plastic composites, based upon the general principles given in Part 1. See ISO 527-1:1993, Subclause 1.2. The test method is suitable for all polymer matrix systems reinforced with unidirectional fibres and which meet the requirements, including failure mode, set out in this part of ISO 527. The method is suitable for composites with either thermoplastic or thermosetting matrices, including preimpregnated materials (prepregs). The reinforcements covered include carbon fibres, glass fibres, aramid fibres and other similar fibres. The reinforcement geometries covered include unidirectional (i.e. completely aligned) fibres and rovings and unidirectional fabrics and tapes. The method is not normally suitable for multidirectional materials composed of several unidirectional layers at different angles (see ISO 527-4). The method is performed using one of two different types of test specimen, depending on the direction of the applied stress relative to the fibre direction (see Clause 6). See ISO 527-1:1993, Subclause 1.5. | |
| language | English | |
| title | DIN EN ISO 527-5 | num |
| title | English -- Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2009) | en |
| title | German -- Kunststoffe - Bestimmung der Zugeigenschaften - Teil 5: Pruefbedingungen fuer unidirektional faserverstaerkte Kunststoffverbundwerkstoffe (ISO 527-5:2009) | other |
| type | standard | |
| page | 19 | |
| status | Active | |
| tree | DIN - Deutsches Institut für Normung e. V.:;2010 | |
| contenttype | fulltext | |
| subject keywords | Kunststoff | |
| subject keywords | Plastics | |
| subject keywords | Pruefung | |
| subject keywords | Tensile tests | |
| subject keywords | Testing | |
| subject keywords | Zugpruefung |