SMD-5962-88613 REV B

DLA - CC - DLA Land and Maritime

MICROCIRCUIT, DIGITAL, CMOS, 16-BIT ERROR DETECTION AND CORRECTION UNIT, MONOLITHIC SILICON

Organization:

Year: 1991

Abstract: This drawing describes device requirements for class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices".
The complete part number shall be as shown in the following example:

The device types shall identify the circuit function as follows:

    Device type      Generic number       Circuit function       Detect time     Correct time           01             39C60A              16-bit EDCU            24 ns            35 ns           02             39C60               16-bit EDCU            36 ns            73 ns           03             29C60A              16-bit EDCU            24 ns            35 ns

The case outlines shall be as designated in appendix C of MIL-M-38510, and as follows:

      Outline letter                                        Case outline            T                  See figure 1 (48-lead, 1.730" × .410" × .190"), dual-in-line package            U                  C-6 (52 terminal, .761" × .761" × .120"), square chip carrier package            X                  D-14 (48-lead, 2.435" × .620" × .225"), dual-in-line package            Y                  See figure 1 (48-lead, 1.235" × .660" × .060"), flat package            Z                  See figure 1 (52 terminal, .761" × .761" × .075"), square chip carrier package

    Voltage on any pin relative to ground- - - - - - -    −0.5 V dc to +7.0 V dc     DC output current into outputs - - - - - - - - - -    30 mA     Storage temperature range- - - - - - - - - - - - -    −65°C to +150°C     Maximum power dissipation (P_D) - - - - - - - - - -    1.0 W 1/     Lead temperature (soldering, 10 seconds) - - - - -    +300°C     Thermal resistance, junction-to-case (θ_JC):        Cases T, Y, Z - - - - - - - - - - - - - - - - -    30°C/W 2/        Cases X and U - - - - - - - - - - - - - - - - -    See MIL-M-38510, appendix C.     Junction temperature (T_J)- - - - - - - - - - - - -    +175°C

    Supply voltage (V_CC) - - - - - - - - - - - - - - -    4.5 V dc to 5.5 V dc     Minimum input high voltage (V_IH) - - - - - - - - -    2.0 V dc     Maximum input low voltage (V_IL)- - - - - - - - - -    0.8 V dc     Case operating temperature range (T_C)- - - - - - -    −55 C to +125°C

Intended Use: Microcircuits conforming to this drawing are intended for use when military specifications do not exist and qualified military devices that will perform the required function are not available for OEM application. When a military specification exists and the product covered by this drawing has been qualified for listing on QPL-B8510, the device specified herein will be inactivated and will not be used for new design. The QPL-38510 product shall be the preferred item for all applications.

URI: https://yse.yabesh.ir/std/handle/yse/207057

Collections :

DLA - CC - DLA Land and Maritime

Show full item record

contributor author	DLA - CC - DLA Land and Maritime
date accessioned	2017-09-04T18:24:43Z
date available	2017-09-04T18:24:43Z
date copyright	33567
date issued	1991
identifier other	IHIWDAAAAAAAAAAA.pdf
identifier uri	https://yse.yabesh.ir/std/handle/yse/207057
description abstract	This drawing describes device requirements for class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices". The complete part number shall be as shown in the following example: The device types shall identify the circuit function as follows: Device type Generic number Circuit function Detect time Correct time 01 39C60A 16-bit EDCU 24 ns 35 ns 02 39C60 16-bit EDCU 36 ns 73 ns 03 29C60A 16-bit EDCU 24 ns 35 ns The case outlines shall be as designated in appendix C of MIL-M-38510, and as follows: Outline letter Case outline T See figure 1 (48-lead, 1.730" × .410" × .190"), dual-in-line package U C-6 (52 terminal, .761" × .761" × .120"), square chip carrier package X D-14 (48-lead, 2.435" × .620" × .225"), dual-in-line package Y See figure 1 (48-lead, 1.235" × .660" × .060"), flat package Z See figure 1 (52 terminal, .761" × .761" × .075"), square chip carrier package Voltage on any pin relative to ground- - - - - - - −0.5 V dc to +7.0 V dc DC output current into outputs - - - - - - - - - - 30 mA Storage temperature range- - - - - - - - - - - - - −65°C to +150°C Maximum power dissipation (P_D) - - - - - - - - - - 1.0 W 1/ Lead temperature (soldering, 10 seconds) - - - - - +300°C Thermal resistance, junction-to-case (θ_JC): Cases T, Y, Z - - - - - - - - - - - - - - - - - 30°C/W 2/ Cases X and U - - - - - - - - - - - - - - - - - See MIL-M-38510, appendix C. Junction temperature (T_J)- - - - - - - - - - - - - +175°C Supply voltage (V_CC) - - - - - - - - - - - - - - - 4.5 V dc to 5.5 V dc Minimum input high voltage (V_IH) - - - - - - - - - 2.0 V dc Maximum input low voltage (V_IL)- - - - - - - - - - 0.8 V dc Case operating temperature range (T_C)- - - - - - - −55 C to +125°C Intended Use: Microcircuits conforming to this drawing are intended for use when military specifications do not exist and qualified military devices that will perform the required function are not available for OEM application. When a military specification exists and the product covered by this drawing has been qualified for listing on QPL-B8510, the device specified herein will be inactivated and will not be used for new design. The QPL-38510 product shall be the preferred item for all applications.
language	English
title	SMD-5962-88613 REV B	num
title	MICROCIRCUIT, DIGITAL, CMOS, 16-BIT ERROR DETECTION AND CORRECTION UNIT, MONOLITHIC SILICON	en
type	standard
page	24
status	Active
tree	DLA - CC - DLA Land and Maritime:;1991
contenttype	fulltext