ECA EIA-364-109

TP-109 LOOP INDUCTANCE MEASUREMENT TEST PROCEDURE FOR ELECTRICAL CONNECTORS (1 nH – 10 nH)

contributor author	ECIA - Electronic Components Industry Association
date accessioned	2017-09-04T18:24:58Z
date available	2017-09-04T18:24:58Z
date copyright	05/20/2003 (R 2009)
date issued	2009
identifier other	IHWLPCAAAAAAAAAA.pdf
identifier uri	https://yse.yabesh.ir/std/handle/yse/207250
description abstract	This procedure applies to interconnect assemblies, such as electrical connectors and sockets. Object This standard describes a test method to measure the loop inductance (1 nH – 10 nH range) in the frequency domain using probes and vector network analyzer. NOTE — This test method is written for test professionals who are knowledgeable in the electronics field and are trained to use the referenced equipment. Because the measurement values are heavily influenced by the fixture and equipment this method cannot describe all of the possible combinations. The major equipment manufacturers provide Application Notes for more in-depth technical description of how to optimize the use of their equipment. It is imperative that the referencing document include the necessary description and sketches for the test professional to understand how to setup and perform the requested measurements.
language	English
title	ECA EIA-364-109	num
title	TP-109 LOOP INDUCTANCE MEASUREMENT TEST PROCEDURE FOR ELECTRICAL CONNECTORS (1 nH – 10 nH)	en
type	standard
page	40
status	Active
tree	ECIA - Electronic Components Industry Association:;2009
contenttype	fulltext