API RP 17G

API - American Petroleum Institute

Recommended Practice for Completion/Workover Risers - Second Edition; ISO 13628-7:2005 Adoption

Organization:

Year: 2011

Abstract: This part of ISO 13628 gives requirements and recommendations for the design, analysis, materials, fabrication, testing and operation of subsea completion/workover (C/WO) riser systems run from a floating vessel.
It is applicable to all new C/WO riser systems and may be applied to modifications, operation of existing systems and reuse at different locations and with different floating vessels.
This part of ISO 13628 is intended to serve as a common reference for designers, manufacturers and operators/users, thereby reducing the need for company specifications.
This part of ISO 13628 is limited to risers, manufactured from low alloy carbon steels. Risers fabricated from special materials such as titanium, composite materials and flexible pipes are beyond the scope of this part of ISO 13628.
Specific equipment covered by this part of ISO 13628 is listed as follows:
— riser joints;
— connectors;
— workover control systems;
— surface flow trees;
— surface tree tension frames;
— lower workover riser packages;
— lubricator valves;
— retainer valves;
— subsea test trees;
— shear subs;
— tubing hanger orientation systems;
— swivels;
— annulus circulation hoses;
— riser spiders;
— umbilical clamps;
— handling and test tools;
— tree cap running tools.
Associated equipment not covered by this part of ISO 13628 is listed below:
— tubing hangers;
— internal and external tree caps;
— tubing hanger running tools;
— surface coiled tubing units;
— surface wireline units;
— surface tree kill and production jumpers.

URI: https://yse.yabesh.ir/std/handle/yse/21203

Collections :

API - American Petroleum Institute

Show full item record

contributor author	API - American Petroleum Institute
date accessioned	2017-09-04T15:21:11Z
date available	2017-09-04T15:21:11Z
date copyright	2006.07.01 (R 2011)
date issued	2011
identifier other	MYONKEAAAAAAAAAA.pdf
identifier uri	https://yse.yabesh.ir/std/handle/yse/21203
description abstract	This part of ISO 13628 gives requirements and recommendations for the design, analysis, materials, fabrication, testing and operation of subsea completion/workover (C/WO) riser systems run from a floating vessel. It is applicable to all new C/WO riser systems and may be applied to modifications, operation of existing systems and reuse at different locations and with different floating vessels. This part of ISO 13628 is intended to serve as a common reference for designers, manufacturers and operators/users, thereby reducing the need for company specifications. This part of ISO 13628 is limited to risers, manufactured from low alloy carbon steels. Risers fabricated from special materials such as titanium, composite materials and flexible pipes are beyond the scope of this part of ISO 13628. Specific equipment covered by this part of ISO 13628 is listed as follows: — riser joints; — connectors; — workover control systems; — surface flow trees; — surface tree tension frames; — lower workover riser packages; — lubricator valves; — retainer valves; — subsea test trees; — shear subs; — tubing hanger orientation systems; — swivels; — annulus circulation hoses; — riser spiders; — umbilical clamps; — handling and test tools; — tree cap running tools. Associated equipment not covered by this part of ISO 13628 is listed below: — tubing hangers; — internal and external tree caps; — tubing hanger running tools; — surface coiled tubing units; — surface wireline units; — surface tree kill and production jumpers.
language	English
title	API RP 17G	num
title	Recommended Practice for Completion/Workover Risers - Second Edition; ISO 13628-7:2005 Adoption	en
type	standard
page	254
status	Active
tree	API - American Petroleum Institute:;2011
contenttype	fulltext