DIN EN 10131

DIN - Deutsches Institut für Normung e. V.

English -- Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape;
German -- Kaltgewalzte Flacherzeugnisse ohne Ueberzug und mit elektrolytischem Zink- oder Zink-Nickel-Ueberzug aus weichen Staehlen sowie aus Staehlen mit hoeherer Streckgrenze zum Kaltumformen - Grenzabmasse und Formtoleranzen

Organization:

DIN - Deutsches Institut für Normung e. V.

Year: 2006

Abstract: This European Standard applies to cold rolled uncoated and electrolytically zinc or zinc-nickel coated low carbon and high yield strength steel flat products for cold forming with a minimum thickness of 0,35 mm and, unless otherwise agreed at the time of ordering, less than or equal to 3 mm thick, delivered in sheet, wide strip, slit wide strip or cut lengths obtained from slit wide strip or sheet. The concerned standards are EN 10130, EN 10152, EN 10271, EN 10209, EN 10268 prEN 10336 and prEN 10338.
It does not apply to cold rolled strip (rolled width < 600 mm) or to flat cold rolled products for which there is a specific standard, in particular the following:
- cold rolled non-grain oriented magnetic steel sheet and strip (EN 10106);
- cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state (EN 10341);
Tinplate and ECCS (EN 10202);
- blackplate in coils (EN 10205);
- cold rolled uncoated non-alloy mild steel narrow strip for cold forming (EN 10139).

URI: https://yse.yabesh.ir/std/handle/yse/231008

Subject: Flachzeug

Collections :

DIN - Deutsches Institut für Normung e. V.

Show full item record

contributor author	DIN - Deutsches Institut für Normung e. V.
date accessioned	2017-09-04T18:49:40Z
date available	2017-09-04T18:49:40Z
date copyright	2006.09.01
date issued	2006
identifier other	KSJYJBAAAAAAAAAA.pdf
identifier uri	https://yse.yabesh.ir/std/handle/yse/231008
description abstract	This European Standard applies to cold rolled uncoated and electrolytically zinc or zinc-nickel coated low carbon and high yield strength steel flat products for cold forming with a minimum thickness of 0,35 mm and, unless otherwise agreed at the time of ordering, less than or equal to 3 mm thick, delivered in sheet, wide strip, slit wide strip or cut lengths obtained from slit wide strip or sheet. The concerned standards are EN 10130, EN 10152, EN 10271, EN 10209, EN 10268 prEN 10336 and prEN 10338. It does not apply to cold rolled strip (rolled width < 600 mm) or to flat cold rolled products for which there is a specific standard, in particular the following: - cold rolled non-grain oriented magnetic steel sheet and strip (EN 10106); - cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state (EN 10341); Tinplate and ECCS (EN 10202); - blackplate in coils (EN 10205); - cold rolled uncoated non-alloy mild steel narrow strip for cold forming (EN 10139).
language	English
title	DIN EN 10131	num
title	English -- Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape	en
title	German -- Kaltgewalzte Flacherzeugnisse ohne Ueberzug und mit elektrolytischem Zink- oder Zink-Nickel-Ueberzug aus weichen Staehlen sowie aus Staehlen mit hoeherer Streckgrenze zum Kaltumformen - Grenzabmasse und Formtoleranzen	other
type	standard
page	14
status	Active
tree	DIN - Deutsches Institut für Normung e. V.:;2006
contenttype	fulltext
subject keywords	Flachzeug
subject keywords	Stahl
subject keywords	Toleranz