درباره ما
DIN EN ISO 14270
English -- Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds (ISO 14270:2016);
German -- Widerstandsschweissen - Zerstoerende Pruefung von Schweissverbindungen - Probenmasse und Verfahren fuer die mechanisierte Schaelpruefung an Widerstandspunkt-, Rollennaht- und Buckelschweissungen mit gepraegten Buckeln (ISO 14270:2016)
Organization:
DIN - Deutsches Institut fš?r Normung e. V.
Year: 2016
Abstract: Scope: This International Standard specifies specimen dimensions and a testing procedure for mechanized peel testing of single spot, seam and embossed projection welds, in overlapping sheets, in any metallic material of thickness 0,5 mm to 3 mm, where the welds have a maximum diameter of 7√t (where t is the sheet thickness in mm). For welds of diameter between 5√t and 7√t, the peel strength values obtained may be lower than expected when using the recommended test specimen dimensions because the test specimen width is designed for welds of diameter of 5√t or less. The object of mechanized peel testing is to determine the peel strength that the test specimen can sustain.
Collections
:
-
Statistics
DIN EN ISO 14270
Show full item record
| contributor author | DIN - Deutsches Institut fš?r Normung e. V. | |
| date accessioned | 2017-10-18T11:01:15Z | |
| date available | 2017-10-18T11:01:15Z | |
| date copyright | 2016.11.01 | |
| date issued | 2016 | |
| identifier other | NAZOSFAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/233791 | |
| description abstract | Scope: This International Standard specifies specimen dimensions and a testing procedure for mechanized peel testing of single spot, seam and embossed projection welds, in overlapping sheets, in any metallic material of thickness 0,5 mm to 3 mm, where the welds have a maximum diameter of 7√t (where t is the sheet thickness in mm). For welds of diameter between 5√t and 7√t, the peel strength values obtained may be lower than expected when using the recommended test specimen dimensions because the test specimen width is designed for welds of diameter of 5√t or less. The object of mechanized peel testing is to determine the peel strength that the test specimen can sustain. | |
| language | English | |
| title | DIN EN ISO 14270 | num |
| title | English -- Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds (ISO 14270:2016) | en |
| title | German -- Widerstandsschweissen - Zerstoerende Pruefung von Schweissverbindungen - Probenmasse und Verfahren fuer die mechanisierte Schaelpruefung an Widerstandspunkt-, Rollennaht- und Buckelschweissungen mit gepraegten Buckeln (ISO 14270:2016) | other |
| type | standard | |
| page | 23 | |
| status | Active | |
| tree | DIN - Deutsches Institut fš?r Normung e. V.:;2016 | |
| contenttype | fulltext |