درباره ما
MIL-PRF-23798D
AIR CONDITIONER, FAN-COIL ASSEMBLY
Organization:
NAVY - SH - Naval Sea Systems Command (Ship Systems)
Year: 2004
Abstract: This specification covers prefabricated fan-coil assemblies for use in conjunction with a chilled water system for air conditioning spaces onboard Naval surface ships. Intended Use: The fan-coil assembly is intended for use in lieu of a fan room with built-up system on board. It is designed for ready connection to a chilled water system, a drainage system, an air distribution system, and a power source. The belt drive for the centrifugal fan is intended to permit selection of capacity to fit application depending on the use or extent of ductwork required. The adjustable motor pulley if specified to permit ready selection of fan speed to fit specific application. Type II fan-coil assemblies should be specified when no duct sections are to be attached to the unit when it is placed in service. Type III fan-coil assemblies should be specified when one or more duct sections are to be attached to the air inlet or to the air outlet of the fan-coil assembly when it is placed in service.
Subject: Centrifugal fan
Collections
:
Show full item record
| contributor author | NAVY - SH - Naval Sea Systems Command (Ship Systems) | |
| date accessioned | 2017-09-04T15:23:56Z | |
| date available | 2017-09-04T15:23:56Z | |
| date copyright | 38334 | |
| date issued | 2004 | |
| identifier other | NGSTGBAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/24273 | |
| description abstract | This specification covers prefabricated fan-coil assemblies for use in conjunction with a chilled water system for air conditioning spaces onboard Naval surface ships. Intended Use: The fan-coil assembly is intended for use in lieu of a fan room with built-up system on board. It is designed for ready connection to a chilled water system, a drainage system, an air distribution system, and a power source. The belt drive for the centrifugal fan is intended to permit selection of capacity to fit application depending on the use or extent of ductwork required. The adjustable motor pulley if specified to permit ready selection of fan speed to fit specific application. Type II fan-coil assemblies should be specified when no duct sections are to be attached to the unit when it is placed in service. Type III fan-coil assemblies should be specified when one or more duct sections are to be attached to the air inlet or to the air outlet of the fan-coil assembly when it is placed in service. | |
| language | English | |
| title | MIL-PRF-23798D | num |
| title | AIR CONDITIONER, FAN-COIL ASSEMBLY | en |
| type | standard | |
| page | 21 | |
| status | Active | |
| tree | NAVY - SH - Naval Sea Systems Command (Ship Systems):;2004 | |
| contenttype | fulltext | |
| subject keywords | Centrifugal fan | |
| subject keywords | Chilled water | |
| subject keywords | Cooling coil | |
| subject keywords | Dehumidifying | |
| subject keywords | Heat exchanger | |
| subject keywords | Heat transfer | |
| subject keywords | HVAC | |
| subject keywords | Ventilation |