درباره ما
MIL-STD-1399 -072A PT 1
INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 072.1 BLAST ENVIRONMENT, MISSILE EXHAUST
Organization:
NAVY - SH - Naval Sea Systems Command (Ship Systems)
Year: 1991
Abstract: Policies and procedures established by MIL-STD-1399 are mandatory. (This section defines the standard interface requirements for the design of systems, equipment, and structure which may be subjected to the blast generated by missile launches.) This section and the basic standard are to be viewed as an integral single document.
This section addresses the interface characteristics of missile blast effects generated by the launch of anti-air, anti-surface, anti-submarine, and point defense missiles from surface ship arm launchers, vertical launchers and box launchers. This section does not apply to submarine launched missiles.
The basic characteristics and constraint categories of this interface are shown symbolically on figure 1. The specific interface characteristics and constraints pertinent to this section are described in section 5.
The criteria of this section are applicable to new ship acquisitions, modernizations, or conversions, and to systems and equipment intended for installation on board such ships. Systems and equipment intended for installation on board active fleet ships shall possess blast resistance characteristics not less than those originally required for the ship in question. The criteria of this section apply only to ships designed for the installation of missiles. Intended Use: This standard is to be used in technical development plans and in design and acquisition specifications for ship acquisitions, modernizations, or conversions, and shipboard systems and equipment.
This section addresses the interface characteristics of missile blast effects generated by the launch of anti-air, anti-surface, anti-submarine, and point defense missiles from surface ship arm launchers, vertical launchers and box launchers. This section does not apply to submarine launched missiles.
The basic characteristics and constraint categories of this interface are shown symbolically on figure 1. The specific interface characteristics and constraints pertinent to this section are described in section 5.
The criteria of this section are applicable to new ship acquisitions, modernizations, or conversions, and to systems and equipment intended for installation on board such ships. Systems and equipment intended for installation on board active fleet ships shall possess blast resistance characteristics not less than those originally required for the ship in question. The criteria of this section apply only to ships designed for the installation of missiles. Intended Use: This standard is to be used in technical development plans and in design and acquisition specifications for ship acquisitions, modernizations, or conversions, and shipboard systems and equipment.
Subject: Blast shield
Collections
:
-
Statistics
MIL-STD-1399 -072A PT 1
Show full item record
| contributor author | NAVY - SH - Naval Sea Systems Command (Ship Systems) | |
| date accessioned | 2017-09-04T15:29:37Z | |
| date available | 2017-09-04T15:29:37Z | |
| date copyright | 33535 | |
| date issued | 1991 | |
| identifier other | NYHWDAAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/30942 | |
| description abstract | Policies and procedures established by MIL-STD-1399 are mandatory. (This section defines the standard interface requirements for the design of systems, equipment, and structure which may be subjected to the blast generated by missile launches.) This section and the basic standard are to be viewed as an integral single document. This section addresses the interface characteristics of missile blast effects generated by the launch of anti-air, anti-surface, anti-submarine, and point defense missiles from surface ship arm launchers, vertical launchers and box launchers. This section does not apply to submarine launched missiles. The basic characteristics and constraint categories of this interface are shown symbolically on figure 1. The specific interface characteristics and constraints pertinent to this section are described in section 5. The criteria of this section are applicable to new ship acquisitions, modernizations, or conversions, and to systems and equipment intended for installation on board such ships. Systems and equipment intended for installation on board active fleet ships shall possess blast resistance characteristics not less than those originally required for the ship in question. The criteria of this section apply only to ships designed for the installation of missiles. Intended Use: This standard is to be used in technical development plans and in design and acquisition specifications for ship acquisitions, modernizations, or conversions, and shipboard systems and equipment. | |
| language | English | |
| title | MIL-STD-1399 -072A PT 1 | num |
| title | INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 072.1 BLAST ENVIRONMENT, MISSILE EXHAUST | en |
| type | standard | |
| page | 15 | |
| status | Active | |
| tree | NAVY - SH - Naval Sea Systems Command (Ship Systems):;1991 | |
| contenttype | fulltext | |
| subject keywords | Blast shield | |
| subject keywords | Direct blast area | |
| subject keywords | Launcher | |
| subject keywords | Missile blast |