درباره ما
API STD 600
Steel Gate Valves - Flanged and Butt-welding Ends, Bolted Bonnets - THIRTEENTH EDITION; Effective Date: July 2015
Organization:
API - American Petroleum Institute
Year: 2015
Abstract: This standard specifies the requirements for a heavy-duty series of bolted bonnet steel gate valves for petroleum refinery and related applications where corrosion, erosion, and other service conditions would indicate a need for full port openings, heavy wall sections, and large stem diameters. This standard sets forth the requirements for the following gate valve features:
— bolted bonnet,
— outside screw and yoke,
— rising stems,
— non-rising handwheels,
— single or double gate,
— wedge or parallel seating,
— metallic seating surfaces,
— flanged or butt-welding ends.
It covers valves of the nominal pipe sizes DN:
— 25, 32, 40, 50, 65, 80, 100, 150, 200, 250, 300, 350, 400, 450, 500, 600, 650, 700, 750, 800, 850, 900, 950, 1000, 1050;
corresponding to nominal pipe sizes NPS:
— 1, 1 1/4, 1 1/2, 2, 2 1/2, 3, 4, 6, 8, 10, 12, 14, 16, 18, 20, 24, 26, 28, 30, 32, 34, 36, 38, 40, 42;
and applies to pressure class designations:
— 150, 300, 600, 900, 1500, 2500.
If product is supplied bearing the API Monogram and manufactured at a facility licensed by API, the requirements of Annex A apply.
— bolted bonnet,
— outside screw and yoke,
— rising stems,
— non-rising handwheels,
— single or double gate,
— wedge or parallel seating,
— metallic seating surfaces,
— flanged or butt-welding ends.
It covers valves of the nominal pipe sizes DN:
— 25, 32, 40, 50, 65, 80, 100, 150, 200, 250, 300, 350, 400, 450, 500, 600, 650, 700, 750, 800, 850, 900, 950, 1000, 1050;
corresponding to nominal pipe sizes NPS:
— 1, 1 1/4, 1 1/2, 2, 2 1/2, 3, 4, 6, 8, 10, 12, 14, 16, 18, 20, 24, 26, 28, 30, 32, 34, 36, 38, 40, 42;
and applies to pressure class designations:
— 150, 300, 600, 900, 1500, 2500.
If product is supplied bearing the API Monogram and manufactured at a facility licensed by API, the requirements of Annex A apply.
Collections
:
Show full item record
| contributor author | API - American Petroleum Institute | |
| date accessioned | 2017-09-04T15:30:03Z | |
| date available | 2017-09-04T15:30:03Z | |
| date copyright | 2015.01.01 | |
| date issued | 2015 | |
| identifier other | NZLUJFAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/31397 | |
| description abstract | This standard specifies the requirements for a heavy-duty series of bolted bonnet steel gate valves for petroleum refinery and related applications where corrosion, erosion, and other service conditions would indicate a need for full port openings, heavy wall sections, and large stem diameters. This standard sets forth the requirements for the following gate valve features: — bolted bonnet, — outside screw and yoke, — rising stems, — non-rising handwheels, — single or double gate, — wedge or parallel seating, — metallic seating surfaces, — flanged or butt-welding ends. It covers valves of the nominal pipe sizes DN: — 25, 32, 40, 50, 65, 80, 100, 150, 200, 250, 300, 350, 400, 450, 500, 600, 650, 700, 750, 800, 850, 900, 950, 1000, 1050; corresponding to nominal pipe sizes NPS: — 1, 1 1/4, 1 1/2, 2, 2 1/2, 3, 4, 6, 8, 10, 12, 14, 16, 18, 20, 24, 26, 28, 30, 32, 34, 36, 38, 40, 42; and applies to pressure class designations: — 150, 300, 600, 900, 1500, 2500. If product is supplied bearing the API Monogram and manufactured at a facility licensed by API, the requirements of Annex A apply. | |
| language | English | |
| title | API STD 600 | num |
| title | Steel Gate Valves - Flanged and Butt-welding Ends, Bolted Bonnets - THIRTEENTH EDITION; Effective Date: July 2015 | en |
| type | standard | |
| page | 42 | |
| status | Active | |
| tree | API - American Petroleum Institute:;2015 | |
| contenttype | fulltext |