درباره ما
Standard Specification for Steel Wire, Chromium-Silicon Alloy
ASTM A401/A401M-24
Organization:
ASTM - ASTM International
Year: 2024
Abstract: This specification covers round chromium-silicon alloy steel spring wire having properties and quality intended for the manufacture of springs resistant to set when used at moderately elevated temperatures. This product is not meant to be used for high cycle fatigue applications. Either ingot or strand cast steel may be made by any commercially accepted steel making process. The steel shall conform on heat and product analysis to the chemical composition requirements prescribed for carbon, manganese, phosphorus, sulfur, silicon and chromium. Annealed and cold drawn or oil-tempered wires shall conform to the specified mechanical properties including tensile strength. Requirements for tension and wrap tests as well as metallurgical requirements for etched surface testing and decarburization are detailed.
Collections
:
-
Statistics
Standard Specification for Steel Wire, Chromium-Silicon Alloy
Show full item record
| contributor author | ASTM - ASTM International | |
| date accessioned | 2025-09-30T18:05:16Z | |
| date available | 2025-09-30T18:05:16Z | |
| date copyright | 2024 | |
| date issued | 2024 | |
| identifier other | a0401_a0401m-24.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/342232 | |
| description abstract | This specification covers round chromium-silicon alloy steel spring wire having properties and quality intended for the manufacture of springs resistant to set when used at moderately elevated temperatures. This product is not meant to be used for high cycle fatigue applications. Either ingot or strand cast steel may be made by any commercially accepted steel making process. The steel shall conform on heat and product analysis to the chemical composition requirements prescribed for carbon, manganese, phosphorus, sulfur, silicon and chromium. Annealed and cold drawn or oil-tempered wires shall conform to the specified mechanical properties including tensile strength. Requirements for tension and wrap tests as well as metallurgical requirements for etched surface testing and decarburization are detailed. | |
| language | English | |
| title | Standard Specification for Steel Wire, Chromium-Silicon Alloy | en |
| title | ASTM A401/A401M-24 | num |
| type | standard | |
| status | Active | |
| tree | ASTM - ASTM International:;2024 | |
| contenttype | fulltext | |
| scope | 1.1 This specification covers round and shaped chromium-silicon alloy steel spring wire having properties and quality intended for the manufacture of springs resistant to set when used at moderately elevated temperatures. This product is not meant to be used for non-static applications involving moderate fatigue stresses (see Specification A1000/A1000M) or high cycle fatigue applications (see Specification A877/A877M). This wire shall be provided either in the annealed and cold-drawn or quenched and tempered condition as specified by the purchaser. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.2.1 Within the text, the inch-pound units are shown in brackets. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. | |
| identifier DOI | 10.1520/A0401_A0401M-24 |