Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule  Stock

ASTM B111/B111M-24

Organization:

Year: 2024

Abstract: This specification establishes the requirements for seamless tube and ferrule stock of copper and various copper alloys of a specified range of diameters, for use in surface condensers, evaporators, and heat exchangers. The specified coppers and copper alloys are UNS No. C10100, C10200, C10300, C10800, C12000, C12200, C14200, C19200, C23000, C28000, C44300, C44400, C44500, C60800, C61300, C61400, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, and C72200. The product shall be produced by processes such as casting, extrusion, drawing, annealing, straightening, trimming, and other processes which may produce a seamless tube in the specified condition. The coppers and copper alloys shall be specifically furnished in any one of the following tempers: annealed, light-drawn, hard-drawn, or hard drawn and end annealed. Tubes for ferrule stock shall be annealed sufficiently to be fully crystallized. Some tubes are suggested to be subjected to a stress-relieving thermal treatment subsequent to straightening. The products shall be subjected to expansion, flattening, and residual stress tests. The tensile and expansion requirements for the products are specified in accordance with the temper designation. The products shall also be subjected to mercurous nitrate, ammonia vapor, Eddy-current, hydrostatic, and pneumatic tests.

URI: https://yse.yabesh.ir/std/handle/yse/342333

Collections :

ASTM - ASTM International

Download PDF : (317.4Kb)
Show Full MetaData Hide Full MetaData
Statistics

Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock

Show full item record

contributor author	ASTM - ASTM International
date accessioned	2025-09-30T18:06:04Z
date available	2025-09-30T18:06:04Z
date copyright	2024
date issued	2024
identifier other	b0111_b0111m-24.pdf
identifier uri	https://yse.yabesh.ir/std/handle/yse/342333
description abstract	This specification establishes the requirements for seamless tube and ferrule stock of copper and various copper alloys of a specified range of diameters, for use in surface condensers, evaporators, and heat exchangers. The specified coppers and copper alloys are UNS No. C10100, C10200, C10300, C10800, C12000, C12200, C14200, C19200, C23000, C28000, C44300, C44400, C44500, C60800, C61300, C61400, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, and C72200. The product shall be produced by processes such as casting, extrusion, drawing, annealing, straightening, trimming, and other processes which may produce a seamless tube in the specified condition. The coppers and copper alloys shall be specifically furnished in any one of the following tempers: annealed, light-drawn, hard-drawn, or hard drawn and end annealed. Tubes for ferrule stock shall be annealed sufficiently to be fully crystallized. Some tubes are suggested to be subjected to a stress-relieving thermal treatment subsequent to straightening. The products shall be subjected to expansion, flattening, and residual stress tests. The tensile and expansion requirements for the products are specified in accordance with the temper designation. The products shall also be subjected to mercurous nitrate, ammonia vapor, Eddy-current, hydrostatic, and pneumatic tests.
language	English
title	Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock	en
title	ASTM B111/B111M-24	num
type	standard
status	Active
tree	ASTM - ASTM International:;2024
contenttype	fulltext
scope	1.1 This specification2 covers the requirements for seamless tube and ferrule stock of copper and various copper alloys up to 31/8 in. [80 mm] inclusive, in diameter, for use in surface condensers, evaporators, and heat exchangers. The following coppers and copper alloys are specified:3 Copper or Copper Alloy UNS No. Previously Used Designation Description C10100 OFE Oxygen-free electronic C10200 OFA Oxygen-free without residual deoxidants C10300 . . . Oxygen-free, extra low phosphorus C10800 . . . Oxygen-free, low phosphorus C12000 DLPA Phosphorized, low residual phosphorus C12200 DHPA Phosphorized, high residual phosphorus C14200 DPAA Phosphorized, arsenical C15630 . . . Nickel Phosphorus C19200 . . . Phosphorized, 1 % iron C23000 . . . Red Brass C28000 . . . Muntz Metal C44300 . . . Admiralty Metals, B, C, and D C44400 . . . . . . C44500 . . . . . . C60800 . . . Aluminum Bronze C61300 . . . . . . C61400 . . . Aluminum Bronze, D C68700 . . . Aluminum Brass, B C70400 . . . 95-5 Copper-Nickel C70600 . . . 90-10 Copper-Nickel C70620 . . . 90-10 Copper-Nickel—Welding Grade C71000 . . . 80-20 Copper-Nickel C71500 . . . 70-30 Copper-Nickel C71520 . . . 70-30 Copper-Nickel—Welding Grade Copper or Copper Alloy UNS No. Previously Used Designation Description C71640 . . . Copper-nickel-iron-manganese C72200 . . . . . . 1.2 Units—The values stated in either inch-pound units or SI units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 The following safety hazards caveat pertains only to the test method(s) portion in Section 17 of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. (Warning—Mercury has been designated by many regulatory agencies as a hazardous substance that can cause serious medical issues. Mercury, or its vapor, has been demonstrated to be hazardous to health and corrosive to materials. Caution when handling mercury and mercury containing products. See the applicable product Safety Data Sheet (SDS) for additional information. Users should be aware that selling mercury or mercury containing products, or both, into your state or country may be prohibited by law. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
identifier DOI	10.1520/B0111_B0111M-24