MIL-DTL-85052/3C

CLAMP, LOOP, TUBE-17-7 PH CRES, 500 DEGREES F

contributor author	NAVY - AS - Naval Air Systems Command
date accessioned	2017-09-04T15:45:45Z
date available	2017-09-04T15:45:45Z
date copyright	03/30/2005
date issued	2005
identifier other	PTBSHBAAAAAAAAAA.pdf
identifier uri	https://yse.yabesh.ir/std/handle/yse/48317
description abstract	Intended Use: These clamps are intended for use as follows: Temperature range: - 65 to + 500 °F. These clamps have cushions, which have been compounded for high temperature capability at the sacrifice of fluid resistance. It is recommended for use only in those areas with operating temperatures from 275 °F to 500 °F where fluid exposure is minimal. For application below 275 °F, the use of clamps with a higher degree of fluid resistance is recommended such as MIL-DTL-85052/1 or MIL-DTL-85052/2 clamps. Systems: All fluid and electrical systems application in high temperature areas. Vibration rating: Clamps are used at low, medium, and high vibration areas depending on mounting methods. The recommended mounting methods for various vibration areas are specified in 6.4 of the general specification. Change from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
language	English
title	MIL-DTL-85052/3C	num
title	CLAMP, LOOP, TUBE-17-7 PH CRES, 500 DEGREES F	en
type	standard
page	6
status	Active
tree	NAVY - AS - Naval Air Systems Command:;2005
contenttype	fulltext