درباره ما
Search
CSV
RISMIL-PRF-32278B: GAUGE, TACTICAL AUTOMATED TANK (TATG) Fuels Operational Readiness Capability Equipment (FORCE)
Abstract: This specification describes a tactical automated tank gauging (TATG) system that is capable of accurately measuring the quantity of liquid petroleum in collapsible tactical fuel storage tanks, which are used throughout ...
A-A-59889: STAIRCASE, AIRCRAFT BOARDING, C-5, TRUCK
Abstract: This commercial item description covers the general requirements for passenger boarding staircase trucks servicing military and commercial aircraft on Government installations.Intended Use: The Aircraft ...
MIL-HDBK-1839A: CALIBRATION AND MEASUREMENT REQUIREMENTS
Abstract: The information and interpretive guidance provided by this handbook are intended to clarify the requirements invoked by MIL-STD-1839. This handbook is for guidance only. This handbook cannot be cited as a requirement. If ...
A-A-59790 VALID NOTICE 1: BALANCER, VEHICLE WHEEL (ELECTRIC)
Abstract: This commercial item description (CID) covers a stationary, torque motor driven truck and vehicle wheel balancer for tube-type or tubeless tires used on trucks and vehicles. The operator driven vehicle should be capable ...
A-A-58045B VALID NOTICE 1: Tractor, Aircraft Towing, MB-2
Abstract: This Commercial Item Description (CID) covers the requirements for one type of MB-2 aircraft towing tractor, hereafter referred to as tow tractor. The tow tractor is capable of towing military aircraft up to 500,000 pounds ...
A-A-58090A: GENERATOR, SIGNAL, VOR/ILS
Abstract: This Commercial Item Description (CID), describes a VOR/ILS/MB signal generator. This CID is meant as a minimum requirement for the VOR/ILS/MB signal generator in which only those manufacturers that meet or surpass the ...
MIL-G-4112: GRINDING MACHINE; SURFACE, HORIZONTAL, RECIPROCATING TABLE
Abstract: This specification covers the requirements for horizontal spindle, reciprocating table, hydraulic and non-hydraulic powered surface grinders.
Surface grinders covered by this specification shall be of the following ...
Surface grinders covered by this specification shall be of the following ...
MIL-PRF-9954D: GLASS BEADS: FOR CLEANING AND PEENING
Abstract: This specification covers glass beads to be used with pressure/suction type blasting equipment.Intended Use: The glass beads covered by this specification are intended for use in suction/pressure blasting ...
MIL-I-25470: INDICATOR, AZIMUTH AND RANGE IP-284A/APS
Abstract: This specification covers one type of azimuth and range indicator, designated Indicator, Azimuth and Range IP-284A/APS. Intended Use: The Indicator, Azimuth and Range, IP-284A/APS is intended for use as part ...