درباره ما
API RP 13B-1
Recommended Practice for Field Testing Water-based Drilling Fluids - FOURTH EDITION
Organization:
API - American Petroleum Institute
Year: 2009
Abstract: This part of ISO 10414 provides standard procedures for determining the following characteristics of water-based drilling fluids:
drilling fluid density (mud weight);
viscosity and gel strength;
filtration;
water, oil and solids contents;
sand content;
methylene blue capacity;
pH;
alkalinity and lime content;
chloride content;
total hardness as calcium.
Annexes A through K provide additional test methods which may be used for
— chemical analysis for calcium, magnesium, calcium sulfate, sulfide, carbonate and potassium;
— determination of shear strength;
— determination of resistivity;
— removal of air;
— drill-pipe corrosion monitoring;
— sampling, inspection and rejection;
— rig-site sampling;
— calibration and verification of glassware, thermometers, viscometers, retort-kit cup and drilling-fluid balances;
— permeability-plugging testing at high temperature and high pressure for two types of equipment;
— example of a report form for water-based drilling fluid.
drilling fluid density (mud weight);
viscosity and gel strength;
filtration;
water, oil and solids contents;
sand content;
methylene blue capacity;
pH;
alkalinity and lime content;
chloride content;
total hardness as calcium.
Annexes A through K provide additional test methods which may be used for
— chemical analysis for calcium, magnesium, calcium sulfate, sulfide, carbonate and potassium;
— determination of shear strength;
— determination of resistivity;
— removal of air;
— drill-pipe corrosion monitoring;
— sampling, inspection and rejection;
— rig-site sampling;
— calibration and verification of glassware, thermometers, viscometers, retort-kit cup and drilling-fluid balances;
— permeability-plugging testing at high temperature and high pressure for two types of equipment;
— example of a report form for water-based drilling fluid.
Collections
:
Show full item record
| contributor author | API - American Petroleum Institute | |
| date accessioned | 2017-09-04T15:49:58Z | |
| date available | 2017-09-04T15:49:58Z | |
| date copyright | 2009.03.01 | |
| date issued | 2009 | |
| identifier other | QFNOLCAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/52980 | |
| description abstract | This part of ISO 10414 provides standard procedures for determining the following characteristics of water-based drilling fluids: drilling fluid density (mud weight); viscosity and gel strength; filtration; water, oil and solids contents; sand content; methylene blue capacity; pH; alkalinity and lime content; chloride content; total hardness as calcium. Annexes A through K provide additional test methods which may be used for — chemical analysis for calcium, magnesium, calcium sulfate, sulfide, carbonate and potassium; — determination of shear strength; — determination of resistivity; — removal of air; — drill-pipe corrosion monitoring; — sampling, inspection and rejection; — rig-site sampling; — calibration and verification of glassware, thermometers, viscometers, retort-kit cup and drilling-fluid balances; — permeability-plugging testing at high temperature and high pressure for two types of equipment; — example of a report form for water-based drilling fluid. | |
| language | English | |
| title | API RP 13B-1 | num |
| title | Recommended Practice for Field Testing Water-based Drilling Fluids - FOURTH EDITION | en |
| type | standard | |
| page | 104 | |
| status | Active | |
| tree | API - American Petroleum Institute:;2009 | |
| contenttype | fulltext |