درباره ما
MIL-PRF-8516G
SEALING COMPOUND, SYNTHETIC RUBBER, ELECTRIC CONNECTORS AND ELECTRIC SYSTEMS, CHEMICALLY CURED
| contributor author | NAVY - AS - Naval Air Systems Command | |
| date accessioned | 2017-09-04T15:53:54Z | |
| date available | 2017-09-04T15:53:54Z | |
| date copyright | 07/31/1997 | |
| date issued | 1997 | |
| identifier other | QQUAEAAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/57248 | |
| description abstract | This specification covers a two-component, chemically cured synthetic rubber compound for insulating, sealing, reinforcing, and corrosion protection of electric connectors, wiring, and other electric apparatus. This specification has provisions for shelf-life extension (see 3.2.4). The sealing compound is furnished in the following types, classes, and categories (see 6.2). The types of sealing compound are as follows: Type I - Low viscosity (100 to 400 poises, initial mixed viscosity) Type II - High viscosity (401 to 1,200 poises, initial mixed viscosity) The classes of sealing compound are as follows: Class 1 - 24-hour cure at 77°F Class 2 - 48-hour cure at 77°F Class 3 - 72-hour cure at 77°F Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Commander, Naval Air Warfare Center Aircraft Division, Code 414100B120-3, Highway 547, Lakehurst, NJ 08733-5100, by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. The sealing compound is categorized as follows: Category A Two-component kit Category B - Premixed, degassed, frozen kit Intended Use: The cured synthetic rubber sealing compound is intended for use as a reinforcing and protecting medium for electric connectors, wiring, and other electric apparatus by sealing and insulating against moisture, solvents, dirt, and other foreign materials without corroding or otherwise adversely affecting the operating capabilities of the electric system. Used within its operating temperature range (−60 to +200°F), the cured compound acts as a deterrent to fatigue, corrosion, and contamination, and aids in reducing arc-over between pins of an electric connector. Type I material is intended for use with electrical connectors, relays, and switches and should not be used in coaxial cable potting operations. | |
| language | English | |
| title | MIL-PRF-8516G | num |
| title | SEALING COMPOUND, SYNTHETIC RUBBER, ELECTRIC CONNECTORS AND ELECTRIC SYSTEMS, CHEMICALLY CURED | en |
| type | standard | |
| page | 30 | |
| status | Active | |
| tree | NAVY - AS - Naval Air Systems Command:;1997 | |
| contenttype | fulltext | |
| subject keywords | Base compound | |
| subject keywords | Curing agent | |
| subject keywords | Organic rubber | |
| subject keywords | Primer | |
| subject keywords | Viscosity |
