AASHTO T 301

Standard Method of Test for Elastic Recovery Test of Asphalt Materials by Means of a Ductilomete

contributor author	AASHTO - American Association of State Highway and Transportation Officials
date accessioned	2017-09-04T15:59:42Z
date available	2017-09-04T15:59:42Z
date copyright	01/01/2013
date issued	2013
identifier other	RGFBGFAAAAAAAAAA.pdf
identifier uri	https://yse.yabesh.ir/std/handle/yse/62864
description abstract	This method is used to determine the elastic recovery of asphalt material through the use of a ductilometer and briquet specimens. The specimens are pulled apart at a rate of 5 cm/min (2 in./min) and held after a specified elongation. The specimens are then severed at the center and allowed to recover undisturbed for 1 h. Unless otherwise specified, the test shall be performed at a temperature of 25 ± 0.5°C (77 ± 1.0°F). The values stated in SI units are to be regarded as the standard. This test may involve hazardous materials, operations, and equipment. This test does not purport to address all of the safety concerns associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
language	English
title	AASHTO T 301	num
title	Standard Method of Test for Elastic Recovery Test of Asphalt Materials by Means of a Ductilomete	en
type	standard
page	4
status	Active
tree	AASHTO - American Association of State Highway and Transportation Officials:;2013
contenttype	fulltext