Show simple item record

SWITCHES, METER AND CONTROL, NAVAL SHIPBOARD

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T16:00:28Z
date available2017-09-04T16:00:28Z
date copyright07/10/1973
date issued1973
identifier otherRINKDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/63643
description abstractThis specification covers the requirements for rotary type, class High-Impact (H.I.) shockproof switches used in meter and control circuits for Naval shipboard applications.
The switches covered by this specification shall be of the following types, as specified (see 6.2.1):
          Type MC - for use in both meter and control applications.           Type MO - for use in meter applications only.


The switches shall have the following ratings, as specified (see 6.2.1):
                                Type MC    Make and break:         20 amperes, 125 volt alternating current (a.c.) (60 or 400 hertz (Hz)).         10 amperes, 250 volt a.c. (60 or 400 Hz).          5 amperes, 500 volt a.c. (60 or 400 Hz).          0.4 amperes, 355 volt direct current (d.c.).          Carry - 20 amperes, all rated voltages.                                          Type MO    Make and break (inductive):         10 amperes, 120 volt a.c. (60 or 400 Hz).          3 amperes, 450 volt a.c. (60 or 400 Hz).          Carry - 10 amperes, all rated voltages.


Switch actuation shall be of the following types, as specified (see 6.2.1):
(a) Spring return (momentary action).
(b) Detent action (nonspring return).
(c) Push-pull.
The switch circuitry shall be as follows and as specified (see 6.2.1). The information shall be included in the drawings (see 3.10) and shall include as a minimum:
(a) Detailed circuit options.
(b) Number of switch positions.
(c) Number of poles.
(d) Shorting or nonshorting contacts.
(e) Location of switch stops; if required.
Operating handles shall be of the following shapes, as specified (see 6.2.1):
(a) Round (plain).
(b) Round (knurled).
(c) Oval.
(d) Pistol grip or lever.
Intended Use: The switches covered by this specification are intended for use in power, control and metering circuits where reliability and ruggedness are required for Naval shipboard applications.
languageEnglish
titleMIL-S-18396Dnum
titleSWITCHES, METER AND CONTROL, NAVAL SHIPBOARDen
typestandard
page11
statusActive
treeDLA - CC - DLA Land and Maritime:;1973
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record