MIL-S-18396D
SWITCHES, METER AND CONTROL, NAVAL SHIPBOARD
Organization:
DLA - CC - DLA Land and Maritime
Year: 1973
Abstract: This specification covers the requirements for rotary type, class High-Impact (H.I.) shockproof switches used in meter and control circuits for Naval shipboard applications.
The switches covered by this specification shall be of the following types, as specified (see 6.2.1):
The switches shall have the following ratings, as specified (see 6.2.1):
Switch actuation shall be of the following types, as specified (see 6.2.1):
(a) Spring return (momentary action).
(b) Detent action (nonspring return).
(c) Push-pull.
The switch circuitry shall be as follows and as specified (see 6.2.1). The information shall be included in the drawings (see 3.10) and shall include as a minimum:
(a) Detailed circuit options.
(b) Number of switch positions.
(c) Number of poles.
(d) Shorting or nonshorting contacts.
(e) Location of switch stops; if required.
Operating handles shall be of the following shapes, as specified (see 6.2.1):
(a) Round (plain).
(b) Round (knurled).
(c) Oval.
(d) Pistol grip or lever.
Intended Use: The switches covered by this specification are intended for use in power, control and metering circuits where reliability and ruggedness are required for Naval shipboard applications.
The switches covered by this specification shall be of the following types, as specified (see 6.2.1):
Type MC - for use in both meter and control applications. Type MO - for use in meter applications only.
The switches shall have the following ratings, as specified (see 6.2.1):
Type MC Make and break: 20 amperes, 125 volt alternating current (a.c.) (60 or 400 hertz (Hz)). 10 amperes, 250 volt a.c. (60 or 400 Hz). 5 amperes, 500 volt a.c. (60 or 400 Hz). 0.4 amperes, 355 volt direct current (d.c.). Carry - 20 amperes, all rated voltages. Type MO Make and break (inductive): 10 amperes, 120 volt a.c. (60 or 400 Hz). 3 amperes, 450 volt a.c. (60 or 400 Hz). Carry - 10 amperes, all rated voltages.
Switch actuation shall be of the following types, as specified (see 6.2.1):
(a) Spring return (momentary action).
(b) Detent action (nonspring return).
(c) Push-pull.
The switch circuitry shall be as follows and as specified (see 6.2.1). The information shall be included in the drawings (see 3.10) and shall include as a minimum:
(a) Detailed circuit options.
(b) Number of switch positions.
(c) Number of poles.
(d) Shorting or nonshorting contacts.
(e) Location of switch stops; if required.
Operating handles shall be of the following shapes, as specified (see 6.2.1):
(a) Round (plain).
(b) Round (knurled).
(c) Oval.
(d) Pistol grip or lever.
Intended Use: The switches covered by this specification are intended for use in power, control and metering circuits where reliability and ruggedness are required for Naval shipboard applications.
Collections
:
Show full item record
| contributor author | DLA - CC - DLA Land and Maritime | |
| date accessioned | 2017-09-04T16:00:28Z | |
| date available | 2017-09-04T16:00:28Z | |
| date copyright | 07/10/1973 | |
| date issued | 1973 | |
| identifier other | RINKDAAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/63643 | |
| description abstract | This specification covers the requirements for rotary type, class High-Impact (H.I.) shockproof switches used in meter and control circuits for Naval shipboard applications. The switches covered by this specification shall be of the following types, as specified (see 6.2.1): Type MC - for use in both meter and control applications. Type MO - for use in meter applications only. The switches shall have the following ratings, as specified (see 6.2.1): Type MC Make and break: 20 amperes, 125 volt alternating current (a.c.) (60 or 400 hertz (Hz)). 10 amperes, 250 volt a.c. (60 or 400 Hz). 5 amperes, 500 volt a.c. (60 or 400 Hz). 0.4 amperes, 355 volt direct current (d.c.). Carry - 20 amperes, all rated voltages. Type MO Make and break (inductive): 10 amperes, 120 volt a.c. (60 or 400 Hz). 3 amperes, 450 volt a.c. (60 or 400 Hz). Carry - 10 amperes, all rated voltages. Switch actuation shall be of the following types, as specified (see 6.2.1): (a) Spring return (momentary action). (b) Detent action (nonspring return). (c) Push-pull. The switch circuitry shall be as follows and as specified (see 6.2.1). The information shall be included in the drawings (see 3.10) and shall include as a minimum: (a) Detailed circuit options. (b) Number of switch positions. (c) Number of poles. (d) Shorting or nonshorting contacts. (e) Location of switch stops; if required. Operating handles shall be of the following shapes, as specified (see 6.2.1): (a) Round (plain). (b) Round (knurled). (c) Oval. (d) Pistol grip or lever. Intended Use: The switches covered by this specification are intended for use in power, control and metering circuits where reliability and ruggedness are required for Naval shipboard applications. | |
| language | English | |
| title | MIL-S-18396D | num |
| title | SWITCHES, METER AND CONTROL, NAVAL SHIPBOARD | en |
| type | standard | |
| page | 11 | |
| status | Active | |
| tree | DLA - CC - DLA Land and Maritime:;1973 | |
| contenttype | fulltext |

درباره ما