MIL-DTL-11589/148G

Abstract

This specification is approved for use by all Departments and Agencies of the Department of Defense <br>The requirements for acquiring the product described herein shall consist of this specification sheet and the issue of MIL-DTL-11589 listed in that issue of the Department of Defense Index of Specifications and Standards (DoDISS) specified in the solicitation. <a><img alt="TABLE" /></a> <a><img alt="TABLE" /></a> <a><img alt="TABLE" /></a> <a><img alt="TABLE" /></a> </span><pre> PHYSICAL REQUIREMENTS OF THE FINISHED RIBBON</pre> <br> <br>REGULAR SIZE: <br>WIDTH: 1-&#8540; inch + 1/16 inch &#8722; 0 (35.0 mm + 1.6 mm &#8722; 0) <pre> TOTAL WARP ENDS (Minimum): 420 PICKS PER INCH: 40 (2 thread single shot) WEIGHT PER LINEAR YARD (Minimum): 0.29 ounces (8.22 g) LINEAR BREAKING STRENGTH FULL WIDTH (Minimum): 100 pounds (45.4 kg)</pre> <br> <br>MINIATURE SIZE: <br>WIDTH: 11/16 inch + 1/16 inch &#8722; 0 (17.5 mm + 1.6 mm &#8722; 0) <pre> TOTAL WARP ENDS (Minimum): 228 PICKS PER INCH: 40 (2 thread single shot) WEIGHT PER LINEAR YARD (Minimum): 0.145 ounces (4.11 g) LINEAR BREAKING STRENGTH FULL WIDTH (Minimum): 50 pounds (22.7 kg)</pre> <br> <br>STREAMER SIZE: <br>WIDTH: 2-&#190; inch + 1/16 inch &#8722; 0 (70.0 mm + 1.6 mm &#8722; 0) <pre> TOTAL WARP ENDS (Minimum): 644 PICKS PER INCH: 70 (1 thread single shot) WEIGHT PER LINEAR YARD (Minimum): 0.31 ounces (8.79 g) LINEAR BREAKING STRENGTH FULL WIDTH (Minimum): 90 pounds (40.9 kg)</pre> <br> <br>