درباره ما
NASA-STD-8739.5 W/CHG 2
FIBER OPTIC TERMINATIONS, CABLE ASSEMBLIES, AND INSTALLATION
Year: 2008
Abstract: Purpose
This Standard sets forth fiber optic termination and cabling requirements for reliable fiber optic installations, both single- and multi-mode fiber.
Special requirements may exist which are not covered by or are not in conformance with the requirements of this Standard. Engineering documentation shall contain the detail for such requirements, including modifications to existing hardware, and shall take precedence over appropriate portions of this Standard when approved in writing by the procuring NASA Center prior to use.
Processing of fiber optic cable assemblies will vary with the specific end item. However, the requirements established in this Standard shall be used for the development of these projectrelated processes.
Applicability
This Standard is applicable to NASA programs involving fiber optic splices, fiber optic cable assemblies, and fiber optic assemblies for flight hardware, mission critical ground support equipment, and elements thereof, and wherever invoked contractually.
This Standard sets forth fiber optic termination and cabling requirements for reliable fiber optic installations, both single- and multi-mode fiber.
Special requirements may exist which are not covered by or are not in conformance with the requirements of this Standard. Engineering documentation shall contain the detail for such requirements, including modifications to existing hardware, and shall take precedence over appropriate portions of this Standard when approved in writing by the procuring NASA Center prior to use.
Processing of fiber optic cable assemblies will vary with the specific end item. However, the requirements established in this Standard shall be used for the development of these projectrelated processes.
Applicability
This Standard is applicable to NASA programs involving fiber optic splices, fiber optic cable assemblies, and fiber optic assemblies for flight hardware, mission critical ground support equipment, and elements thereof, and wherever invoked contractually.
-
Statistics
NASA-STD-8739.5 W/CHG 2
Show full item record
| contributor author | NASA - National Aeronautics and Space Administration (NASA) | |
| date accessioned | 2017-09-04T16:11:52Z | |
| date available | 2017-09-04T16:11:52Z | |
| date copyright | 03/29/2011 (R 2008) | |
| date issued | 2008 | |
| identifier other | SNFEFEAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/75058 | |
| description abstract | Purpose This Standard sets forth fiber optic termination and cabling requirements for reliable fiber optic installations, both single- and multi-mode fiber. Special requirements may exist which are not covered by or are not in conformance with the requirements of this Standard. Engineering documentation shall contain the detail for such requirements, including modifications to existing hardware, and shall take precedence over appropriate portions of this Standard when approved in writing by the procuring NASA Center prior to use. Processing of fiber optic cable assemblies will vary with the specific end item. However, the requirements established in this Standard shall be used for the development of these projectrelated processes. Applicability This Standard is applicable to NASA programs involving fiber optic splices, fiber optic cable assemblies, and fiber optic assemblies for flight hardware, mission critical ground support equipment, and elements thereof, and wherever invoked contractually. | |
| language | English | |
| title | NASA-STD-8739.5 W/CHG 2 | num |
| title | FIBER OPTIC TERMINATIONS, CABLE ASSEMBLIES, AND INSTALLATION | en |
| type | standard | |
| page | 55 | |
| status | Active | |
| tree | NASA - National Aeronautics and Space Administration (NASA):;2008 | |
| contenttype | fulltext |