Show simple item record

MICROCIRCUIT, DIGITAL, CMOS, MANCHESTER ENCODER-DECODER, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T16:13:52Z
date available2017-09-04T16:13:52Z
date copyright05/21/1993
date issued1993
identifier otherSSRXDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/77141
description abstractThis drawing forms a part of a one part - one part number documentation system (see 6.6 herein). Two product assurance classes consisting of military high reliability (device classes B, Q, and M) and space application (device classes S and V), and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). Device class M microcircuits represent non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices". When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN.
The PIN shall be as shown in the following example: CHART
Device classes M, B, and S RHA marked devices shall meet the MIL-M-38510 specified RHA levels and shall be marked with the appropriate RHA designator. Device classes Q and V RHA marked devices shall meet the MIL-I-38535 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type(s) shall identify the circuit function as follows:
        Device type                Generic number                         Circuit function               01                        6409                            Manchester encoder-decoder


The device class designator shall be a single letter identifying the product assurance level as follows:
        Device class                             Device requirements documentation               M                     Vendor self-certification to the requirements for non-JAN class B                                    microcircuits in accordance with 1.2.1 of MIL-STD-883            B or S                   Certification and qualification to MIL-M-38510            Q or V                   Certification and qualification to MIL-I-38535


The case outline(s) shall be as designated in MIL-STD-1835 and as follows:
      Outline letter      Descriptive designator      Terminals            Package style              R             GDIP1-T20 or CDIP2-T20          20            Dual in line package              2                    CQCC1-N20                20            Square leadless chip carrier


The lead finish shall be as specified in MIL-M-38510 for classes M, B, and S or MIL-I-38535 for classes Q and V. Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference.
  Supply voltage  . . . . . . . . . . . . . . . . . . . . . .  +7.0 V   Input, Output or I/O voltage range applied  . . . . . . . .  GND −0.5 V to VCC +0.5 V   Storage temperature range . . . . . . . . . . . . . . . . .  −65°C to +150°C   Junction temperature  . . . . . . . . . . . . . . . . . . .  +175°C   Lead temperature (soldering 10 sec) . . . . . . . . . . . .  +300°C   Power dissipation     Case R  . . . . . . . . . . . . . . . . . . . . . . . . .  602 mW     Case 2  . . . . . . . . . . . . . . . . . . . . . . . . .  595 mW   Thermal resistance, Junction-to-case  . . . . . . . . . . .  See MIL-STD-1835


  Operating temperature range . . . . . . . . . . . . . . . .  −55°C to +125°C   Supply voltage range  . . . . . . . . . . . . . . . . . . .  4.5 V ≤ VCC ≤ 5.5 V   Input rise and fall times . . . . . . . . . . . . . . . . .  50 ns max


    Fault coverage measurement of manufacturing       logic tests (MIL-STD-883, test method 5012) . . . . . .  2/ percent


Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device classes B and Q devices will replace device class M devices.
languageEnglish
titleSMD-5962-90888num
titleMICROCIRCUIT, DIGITAL, CMOS, MANCHESTER ENCODER-DECODER, MONOLITHIC SILICONen
typestandard
page20
statusActive
treeDLA - CC - DLA Land and Maritime:;1993
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record