SMD-5962-90888
MICROCIRCUIT, DIGITAL, CMOS, MANCHESTER ENCODER-DECODER, MONOLITHIC SILICON
Organization:
DLA - CC - DLA Land and Maritime
Year: 1993
Abstract: This drawing forms a part of a one part - one part number documentation system (see 6.6 herein). Two product assurance classes consisting of military high reliability (device classes B, Q, and M) and space application (device classes S and V), and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). Device class M microcircuits represent non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices". When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN.
The PIN shall be as shown in the following example:
Device classes M, B, and S RHA marked devices shall meet the MIL-M-38510 specified RHA levels and shall be marked with the appropriate RHA designator. Device classes Q and V RHA marked devices shall meet the MIL-I-38535 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type(s) shall identify the circuit function as follows:
The device class designator shall be a single letter identifying the product assurance level as follows:
The case outline(s) shall be as designated in MIL-STD-1835 and as follows:
The lead finish shall be as specified in MIL-M-38510 for classes M, B, and S or MIL-I-38535 for classes Q and V. Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference.
Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device classes B and Q devices will replace device class M devices.
The PIN shall be as shown in the following example:
Device classes M, B, and S RHA marked devices shall meet the MIL-M-38510 specified RHA levels and shall be marked with the appropriate RHA designator. Device classes Q and V RHA marked devices shall meet the MIL-I-38535 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type(s) shall identify the circuit function as follows:
Device type Generic number Circuit function 01 6409 Manchester encoder-decoder
The device class designator shall be a single letter identifying the product assurance level as follows:
Device class Device requirements documentation M Vendor self-certification to the requirements for non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883 B or S Certification and qualification to MIL-M-38510 Q or V Certification and qualification to MIL-I-38535
The case outline(s) shall be as designated in MIL-STD-1835 and as follows:
Outline letter Descriptive designator Terminals Package style R GDIP1-T20 or CDIP2-T20 20 Dual in line package 2 CQCC1-N20 20 Square leadless chip carrier
The lead finish shall be as specified in MIL-M-38510 for classes M, B, and S or MIL-I-38535 for classes Q and V. Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference.
Supply voltage . . . . . . . . . . . . . . . . . . . . . . +7.0 V Input, Output or I/O voltage range applied . . . . . . . . GND −0.5 V to VCC +0.5 V Storage temperature range . . . . . . . . . . . . . . . . . −65°C to +150°C Junction temperature . . . . . . . . . . . . . . . . . . . +175°C Lead temperature (soldering 10 sec) . . . . . . . . . . . . +300°C Power dissipation Case R . . . . . . . . . . . . . . . . . . . . . . . . . 602 mW Case 2 . . . . . . . . . . . . . . . . . . . . . . . . . 595 mW Thermal resistance, Junction-to-case . . . . . . . . . . . See MIL-STD-1835
Operating temperature range . . . . . . . . . . . . . . . . −55°C to +125°C Supply voltage range . . . . . . . . . . . . . . . . . . . 4.5 V ≤ VCC ≤ 5.5 V Input rise and fall times . . . . . . . . . . . . . . . . . 50 ns max
Fault coverage measurement of manufacturing logic tests (MIL-STD-883, test method 5012) . . . . . . 2/ percent
Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device classes B and Q devices will replace device class M devices.
Collections
:
Show full item record
| contributor author | DLA - CC - DLA Land and Maritime | |
| date accessioned | 2017-09-04T16:13:52Z | |
| date available | 2017-09-04T16:13:52Z | |
| date copyright | 05/21/1993 | |
| date issued | 1993 | |
| identifier other | SSRXDAAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/77141 | |
| description abstract | This drawing forms a part of a one part - one part number documentation system (see 6.6 herein). Two product assurance classes consisting of military high reliability (device classes B, Q, and M) and space application (device classes S and V), and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). Device class M microcircuits represent non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices". When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN. The PIN shall be as shown in the following example: Device classes M, B, and S RHA marked devices shall meet the MIL-M-38510 specified RHA levels and shall be marked with the appropriate RHA designator. Device classes Q and V RHA marked devices shall meet the MIL-I-38535 specified RHA levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. The device type(s) shall identify the circuit function as follows: Device type Generic number Circuit function 01 6409 Manchester encoder-decoder The device class designator shall be a single letter identifying the product assurance level as follows: Device class Device requirements documentation M Vendor self-certification to the requirements for non-JAN class B microcircuits in accordance with 1.2.1 of MIL-STD-883 B or S Certification and qualification to MIL-M-38510 Q or V Certification and qualification to MIL-I-38535 The case outline(s) shall be as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style R GDIP1-T20 or CDIP2-T20 20 Dual in line package 2 CQCC1-N20 20 Square leadless chip carrier The lead finish shall be as specified in MIL-M-38510 for classes M, B, and S or MIL-I-38535 for classes Q and V. Finish letter "X" shall not be marked on the microcircuit or its packaging. The "X" designation is for use in specifications when lead finishes A, B, and C are considered acceptable and interchangeable without preference. Supply voltage . . . . . . . . . . . . . . . . . . . . . . +7.0 V Input, Output or I/O voltage range applied . . . . . . . . GND −0.5 V to VCC +0.5 V Storage temperature range . . . . . . . . . . . . . . . . . −65°C to +150°C Junction temperature . . . . . . . . . . . . . . . . . . . +175°C Lead temperature (soldering 10 sec) . . . . . . . . . . . . +300°C Power dissipation Case R . . . . . . . . . . . . . . . . . . . . . . . . . 602 mW Case 2 . . . . . . . . . . . . . . . . . . . . . . . . . 595 mW Thermal resistance, Junction-to-case . . . . . . . . . . . See MIL-STD-1835 Operating temperature range . . . . . . . . . . . . . . . . −55°C to +125°C Supply voltage range . . . . . . . . . . . . . . . . . . . 4.5 V ≤ VCC ≤ 5.5 V Input rise and fall times . . . . . . . . . . . . . . . . . 50 ns max Fault coverage measurement of manufacturing logic tests (MIL-STD-883, test method 5012) . . . . . . 2/ percent Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device classes B and Q devices will replace device class M devices. | |
| language | English | |
| title | SMD-5962-90888 | num |
| title | MICROCIRCUIT, DIGITAL, CMOS, MANCHESTER ENCODER-DECODER, MONOLITHIC SILICON | en |
| type | standard | |
| page | 20 | |
| status | Active | |
| tree | DLA - CC - DLA Land and Maritime:;1993 | |
| contenttype | fulltext |

درباره ما