Show simple item record

Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete

contributor authorAASHTO - American Association of State Highway and Transportation Officials
date accessioned2017-09-04T16:14:00Z
date available2017-09-04T16:14:00Z
date copyright2011.01.01 (R 2015)
date issued2015
identifier otherSTCXKFAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/77277
description abstractThis specification covers coal fly ash and raw or calcined natural pozzolan for use in concrete where cementitious or pozzolanic action, or both, is desired or where other properties normally attributed to finely divided coal fly ash and raw or calcined natural pozzolans may be desired or where both objectives are to be achieved.
Note 1-Finely divided materials may tend to reduce the entrained air content of concrete. Hence, if a fly ash or natural pozzolan is added to any concrete for which entrainment of air is specified, provision should be made to ensure that the specified air content is maintained by air content tests and by use of additional air-entraining admixture or use of an air-entraining admixture in combination with air-entraining hydraulic cement.
The values stated in SI units are to be regarded as the standard.
languageEnglish
titleAASHTO M 295num
titleStandard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concreteen
typestandard
page6
statusActive
treeAASHTO - American Association of State Highway and Transportation Officials:;2015
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record