MIL-STD-1580B CHANGE 2
DESTRUCTIVE PHYSICAL ANALYSIS FOR ELECTRONIC, ELECTROMAGNETIC, AND ELECTROMECHANICAL PARTS
Organization:
DLA - CC - DLA Land and Maritime
Year: 2010
Abstract: This standard describes the general requirements for performance of destructive physical analysis (DPA) on samples of parts. In addition to the requirements for the analysis procedures, the general criteria for interpreting results, such as for the acceptance or rejection of associated production lots, is included for typical electronic, electromagnetic, and electromechanical parts.Intended Use: This standard is intended to be referenced, as applicable, in acquisition contracts involving the manufacture of parts or equipment to be used in space and launch vehicles. To ensure the required high quality of the parts, stringent in-process controls must be imposed and a comprehensive test program conducted on the completed parts. A key ingredient of the test program is the assessment of part lot quality based on the destructive examination of samples randomly selected from each production lot. This DPA is used to verify the internal design, materials, construction, and workmanship of the "as-built" sample parts to preclude installation of parts having patent or latent defects. DPA can also be used to monitor processes to evaluate supplier production trends and for failure analysis. DPA can also be used to derive information to aid in defining improvement changes in design, materials, or processes or to aid in dispositioning parts that exhibit anomalies.
Subject: Analysis
Collections
:
-
Statistics
MIL-STD-1580B CHANGE 2
Show full item record
| contributor author | DLA - CC - DLA Land and Maritime | |
| date accessioned | 2017-09-04T16:16:58Z | |
| date available | 2017-09-04T16:16:58Z | |
| date copyright | 40497 | |
| date issued | 2010 | |
| identifier other | TBGSEDAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/80270 | |
| description abstract | This standard describes the general requirements for performance of destructive physical analysis (DPA) on samples of parts. In addition to the requirements for the analysis procedures, the general criteria for interpreting results, such as for the acceptance or rejection of associated production lots, is included for typical electronic, electromagnetic, and electromechanical parts.Intended Use: This standard is intended to be referenced, as applicable, in acquisition contracts involving the manufacture of parts or equipment to be used in space and launch vehicles. To ensure the required high quality of the parts, stringent in-process controls must be imposed and a comprehensive test program conducted on the completed parts. A key ingredient of the test program is the assessment of part lot quality based on the destructive examination of samples randomly selected from each production lot. This DPA is used to verify the internal design, materials, construction, and workmanship of the "as-built" sample parts to preclude installation of parts having patent or latent defects. DPA can also be used to monitor processes to evaluate supplier production trends and for failure analysis. DPA can also be used to derive information to aid in defining improvement changes in design, materials, or processes or to aid in dispositioning parts that exhibit anomalies. | |
| language | English | |
| title | MIL-STD-1580B CHANGE 2 | num |
| title | DESTRUCTIVE PHYSICAL ANALYSIS FOR ELECTRONIC, ELECTROMAGNETIC, AND ELECTROMECHANICAL PARTS | en |
| type | standard | |
| page | 134 | |
| status | Revised | |
| tree | DLA - CC - DLA Land and Maritime:;2010 | |
| contenttype | fulltext | |
| subject keywords | Analysis | |
| subject keywords | Capacitors | |
| subject keywords | Coils | |
| subject keywords | Connectors | |
| subject keywords | Contacts | |
| subject keywords | Crystals | |
| subject keywords | Decapsulation | |
| subject keywords | Delid | |
| subject keywords | Destructive | |
| subject keywords | Diodes | |
| subject keywords | Filters | |
| subject keywords | Inductors | |
| subject keywords | Inspections | |
| subject keywords | Microcircuits | |
| subject keywords | Particles | |
| subject keywords | Physical | |
| subject keywords | Resistors | |
| subject keywords | Switches | |
| subject keywords | Thermistors | |
| subject keywords | Transformers | |
| subject keywords | Transistors |

درباره ما