Show simple item record

MICROCIRCUITS, DIGITAL, ADVANCED SCHOTTKY TTL, SHIFT REGISTER, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T16:17:58Z
date available2017-09-04T16:17:58Z
date copyright07/11/1991
date issued1991
identifier otherTEGWDAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/81437
description abstractThis drawing describes device requirements for class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN device".
The complete part number shall be as shown in the following example: CHART
The device type shall identify the circuit function as follows:
    Device type          Generic number                          Circuit function           01                 54F676            16-bit serial/parallel-in, serial-out shift register


The case outlines shall be as designated in appendix C of MIL-M-38510, and as follows:
    Outline letter                                 Case outline            K                     F-6 (24-lead, .640" ×.420" × .090"), flat package           L                     D-9 (24-lead, 1.280" × .310" × .200"), dual-in-line package           3                     C-4 (28-terminal, .460" × .460" × .100"), square chip carrier                                   package


    Supply voltage range - - - - - - - - - - - - - - - -   −0.5 V dc to +7.0 V dc     Input voltage range  - - - - - - - - - - - - - - - -   −1.2 V dc at −18 mA to +7.0 V dc     Maximum power dissipation (PD)  1/ - - - - - - - - -   396 mW     Storage temperature range  - - - - - - - - - - - - -   −65°C to +150°C     Lead temperature (soldering, 10 seconds) - - - - - -   +300°C     Thermal resistance, junction-to-case (θJC) - - - - -   See MIL-M-38510, appendix C     Junction temperature (TJ)  - - - - - - - - - - - - -   +175°C


    Supply voltage (VCC) - - - - - - - - - - - - - - - -   +4.5 V dc to +5.5 V dc     Case operating temperature range (TC)- - - - - - - -   −55°C to +125°C     Minimum high level input voltage (VIH) - - - - - - -   2.0 V dc     Maximum low level input voltage (VIL)- - - - - - - -   0.8 V dc     Minimum setup time (ts):         High or low, SI to [C bar][P bar]- - - - - - - - - - - - - - -   4 ns       High or low, Pn to [C bar][P bar]- - - - - - - - - - - - - - -   3 ns       High or low, M to [C bar][P bar] - - - - - - - - - - - - - - -   8 ns       Low, [C bar][S bar] to [C bar][P bar]- - - - - - - - - - - - - - - - - - -   12 ns


    Minimum hold time (th):       High or low, SI to [C bar][P bar]- - - - - - - - - - - - - - -    4 ns       High or low, Pn to [C bar][P bar]- - - - - - - - - - - - - - -    4ns       High or low, M to [C bar][P bar] - - - - - - - - - - - - - - -    2 ns       High, [C bar][S bar] to [C bar][P bar] - - - - - - - - - - - - - - - - - -   10 ns     Minimum clock pulse width (tw):       High - - - - - - - - - - - - - - - - - - - - - - -    4 ns       Low- - - - - - - - - - - - - - - - - - - - - - - -    6 ns


Intended Use: Microcircuits conforming to this drawing are intended for use when military specifications do not exist and qualified military devices that will perform the required function are not available for OEM application. When a military specification exists and the product covered by this drawing has been qualified for listing on QPL-38510, the device specified herein will be inactivated and will not be used for new design. The QPL-38510 product shall be the preferred item for all applications.
languageEnglish
titleSMD-5962-88546 REV Bnum
titleMICROCIRCUITS, DIGITAL, ADVANCED SCHOTTKY TTL, SHIFT REGISTER, MONOLITHIC SILICONen
typestandard
page11
statusActive
treeDLA - CC - DLA Land and Maritime:;1991
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record