SMD-5962-88546 REV B
MICROCIRCUITS, DIGITAL, ADVANCED SCHOTTKY TTL, SHIFT REGISTER, MONOLITHIC SILICON
Organization:
DLA - CC - DLA Land and Maritime
Year: 1991
Abstract: This drawing describes device requirements for class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN device".
The complete part number shall be as shown in the following example:
The device type shall identify the circuit function as follows:
The case outlines shall be as designated in appendix C of MIL-M-38510, and as follows:
Intended Use: Microcircuits conforming to this drawing are intended for use when military specifications do not exist and qualified military devices that will perform the required function are not available for OEM application. When a military specification exists and the product covered by this drawing has been qualified for listing on QPL-38510, the device specified herein will be inactivated and will not be used for new design. The QPL-38510 product shall be the preferred item for all applications.
The complete part number shall be as shown in the following example:
The device type shall identify the circuit function as follows:
Device type Generic number Circuit function 01 54F676 16-bit serial/parallel-in, serial-out shift register
The case outlines shall be as designated in appendix C of MIL-M-38510, and as follows:
Outline letter Case outline K F-6 (24-lead, .640" ×.420" × .090"), flat package L D-9 (24-lead, 1.280" × .310" × .200"), dual-in-line package 3 C-4 (28-terminal, .460" × .460" × .100"), square chip carrier package
Supply voltage range - - - - - - - - - - - - - - - - −0.5 V dc to +7.0 V dc Input voltage range - - - - - - - - - - - - - - - - −1.2 V dc at −18 mA to +7.0 V dc Maximum power dissipation (PD) 1/ - - - - - - - - - 396 mW Storage temperature range - - - - - - - - - - - - - −65°C to +150°C Lead temperature (soldering, 10 seconds) - - - - - - +300°C Thermal resistance, junction-to-case (θJC) - - - - - See MIL-M-38510, appendix C Junction temperature (TJ) - - - - - - - - - - - - - +175°C
Supply voltage (VCC) - - - - - - - - - - - - - - - - +4.5 V dc to +5.5 V dc Case operating temperature range (TC)- - - - - - - - −55°C to +125°C Minimum high level input voltage (VIH) - - - - - - - 2.0 V dc Maximum low level input voltage (VIL)- - - - - - - - 0.8 V dc Minimum setup time (ts): High or low, SI to [C bar][P bar]- - - - - - - - - - - - - - - 4 ns High or low, Pn to [C bar][P bar]- - - - - - - - - - - - - - - 3 ns High or low, M to [C bar][P bar] - - - - - - - - - - - - - - - 8 ns Low, [C bar][S bar] to [C bar][P bar]- - - - - - - - - - - - - - - - - - - 12 ns
Minimum hold time (th): High or low, SI to [C bar][P bar]- - - - - - - - - - - - - - - 4 ns High or low, Pn to [C bar][P bar]- - - - - - - - - - - - - - - 4ns High or low, M to [C bar][P bar] - - - - - - - - - - - - - - - 2 ns High, [C bar][S bar] to [C bar][P bar] - - - - - - - - - - - - - - - - - - 10 ns Minimum clock pulse width (tw): High - - - - - - - - - - - - - - - - - - - - - - - 4 ns Low- - - - - - - - - - - - - - - - - - - - - - - - 6 ns
Intended Use: Microcircuits conforming to this drawing are intended for use when military specifications do not exist and qualified military devices that will perform the required function are not available for OEM application. When a military specification exists and the product covered by this drawing has been qualified for listing on QPL-38510, the device specified herein will be inactivated and will not be used for new design. The QPL-38510 product shall be the preferred item for all applications.
Collections
:
-
Statistics
SMD-5962-88546 REV B
Show full item record
| contributor author | DLA - CC - DLA Land and Maritime | |
| date accessioned | 2017-09-04T16:17:58Z | |
| date available | 2017-09-04T16:17:58Z | |
| date copyright | 07/11/1991 | |
| date issued | 1991 | |
| identifier other | TEGWDAAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/81437 | |
| description abstract | This drawing describes device requirements for class B microcircuits in accordance with 1.2.1 of MIL-STD-883, "Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN device". The complete part number shall be as shown in the following example: The device type shall identify the circuit function as follows: Device type Generic number Circuit function 01 54F676 16-bit serial/parallel-in, serial-out shift register The case outlines shall be as designated in appendix C of MIL-M-38510, and as follows: Outline letter Case outline K F-6 (24-lead, .640" ×.420" × .090"), flat package L D-9 (24-lead, 1.280" × .310" × .200"), dual-in-line package 3 C-4 (28-terminal, .460" × .460" × .100"), square chip carrier package Supply voltage range - - - - - - - - - - - - - - - - −0.5 V dc to +7.0 V dc Input voltage range - - - - - - - - - - - - - - - - −1.2 V dc at −18 mA to +7.0 V dc Maximum power dissipation (PD) 1/ - - - - - - - - - 396 mW Storage temperature range - - - - - - - - - - - - - −65°C to +150°C Lead temperature (soldering, 10 seconds) - - - - - - +300°C Thermal resistance, junction-to-case (θJC) - - - - - See MIL-M-38510, appendix C Junction temperature (TJ) - - - - - - - - - - - - - +175°C Supply voltage (VCC) - - - - - - - - - - - - - - - - +4.5 V dc to +5.5 V dc Case operating temperature range (TC)- - - - - - - - −55°C to +125°C Minimum high level input voltage (VIH) - - - - - - - 2.0 V dc Maximum low level input voltage (VIL)- - - - - - - - 0.8 V dc Minimum setup time (ts): High or low, SI to [C bar][P bar]- - - - - - - - - - - - - - - 4 ns High or low, Pn to [C bar][P bar]- - - - - - - - - - - - - - - 3 ns High or low, M to [C bar][P bar] - - - - - - - - - - - - - - - 8 ns Low, [C bar][S bar] to [C bar][P bar]- - - - - - - - - - - - - - - - - - - 12 ns Minimum hold time (th): High or low, SI to [C bar][P bar]- - - - - - - - - - - - - - - 4 ns High or low, Pn to [C bar][P bar]- - - - - - - - - - - - - - - 4ns High or low, M to [C bar][P bar] - - - - - - - - - - - - - - - 2 ns High, [C bar][S bar] to [C bar][P bar] - - - - - - - - - - - - - - - - - - 10 ns Minimum clock pulse width (tw): High - - - - - - - - - - - - - - - - - - - - - - - 4 ns Low- - - - - - - - - - - - - - - - - - - - - - - - 6 ns Intended Use: Microcircuits conforming to this drawing are intended for use when military specifications do not exist and qualified military devices that will perform the required function are not available for OEM application. When a military specification exists and the product covered by this drawing has been qualified for listing on QPL-38510, the device specified herein will be inactivated and will not be used for new design. The QPL-38510 product shall be the preferred item for all applications. | |
| language | English | |
| title | SMD-5962-88546 REV B | num |
| title | MICROCIRCUITS, DIGITAL, ADVANCED SCHOTTKY TTL, SHIFT REGISTER, MONOLITHIC SILICON | en |
| type | standard | |
| page | 11 | |
| status | Active | |
| tree | DLA - CC - DLA Land and Maritime:;1991 | |
| contenttype | fulltext |

درباره ما