درباره ما
NAVY - OS - Naval Surface Warfare Center (NSWCIHEODTD): Recent submissions
Now showing items 781-800 of 1094
-
MIL-A-23685B
Abstract: This specification covers steel wire pallet adapters intended for use in palletizing projectiles, rocket heads, cartridge containers and bomb fins (see 6.1).
The pallet adapters shall be of the following types ... -
MIL-T-10695A
Abstract: This specification covers one type of shutter time indicator, designated Test Sets, Shutter Speed (Camera TS-703()/UF), designed for testing the performance of both between the lens, and focal plane camera shutters, by use ... -
MIL-T-82825
Abstract: This specification defines one grade of triphenylbismuth, referred to herein as triphenylbismuth (TPB) (see 6.1). Intended Use: The triphenylbismuth specified herein is intended for use as an ingredient ...Subject(s) : Rocket Motor , Dual Thrust , Mark 104 , Solid propellant , Standard Missile , -
MIL-DTL-32106
Abstract: This specification furnishes the general requirements for the manufacture and acceptance of electrical initiators for use in rocket motors. Intended Use: These initiators are intended for use in military ...Subject(s) : JATO , -
MIL-O-82672A
Abstract: This specification covers one type of liquid monopropellant designated Otto Fuel II. This specification applies at the time of formulation by the manufacturer. Intended Use: Otto Fuel II is intended for use ...Subject(s) : 2-Nitrodiphenylamine , Batch nitration , Bromination , Chromatography , high performance liquid , Continuous process nitration , Data Item Descriptions , Di-Butyl sebacate , Material safety data sheet , Moisture , Nitrometer , Propylene glycol dinitrate , Safety , Shipment in drums , Shipment in tanks , Sodium content , Spectrophotometer , Toxicity , -
MIL-DTL-22244F
Abstract: This specification covers the requirements for the manufacture and acceptance of the Mark 23 Mod 0 Impulse CartridgeIntended Use: The Mark 23 Mod 0 Impulse Cartridge is used to actuate a helicopter-rescue ...Subject(s) : Ejection systems , aircrew , Emergency escape systems , aircrew , Escape systems , aircrew , Life-saving systems , aircrew , -
MIL-I-82880
Abstract: This specification covers the requirements for the M5A2 Cartridge Actuated Initiator Remanufactured Metal Parts Assembly (see 6.1). Intended Use: The initiator assembly is used in conjunction with ...Subject(s) : Ejection systems , aircrew , Emergency escape systems , aircrew , Escape systems , aircrew , Life-saving systems , aircrew , -
MIL-R-82689
Abstract: This specification covers the requirements for the M1A1 Gas Actuated Firing Pin Release (see 6.1). Intended Use: The firing pin release assembly is used to release the precocked firing mechanism of the RAU-3/A ...Subject(s) : Ejection systems , aircrew , Emergency escape systems , aircrew , Escape systems , aircrew , Life-saving systems , aircrew , -
MIL-C-43438D
Abstract: This specification covers a plier type, manually operated crimping and fuse cutting tool. Intended Use: The crimper is intended for use in manually cutting safety fuse and for crimping blasting caps to the ... -
MIL-I-81537
Abstract: This document governs the manufacture, assembly and preparation for delivery of the MARK 13 MOD 0 ignition element and the methods of inspection and tests upon which product acceptance will be based. Intended ...