درباره ما
DLA - CC - DLA Land and Maritime: Recent submissions
Now showing items 4021-4040 of 11453
-
MIL-A-55339/29A
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The complete requirements for procuring the adapter described herein shall consist of this document and the latest ... -
DSCC-VID-V62/04678 REV A
Abstract: This drawing documents the general requirements of a high performance 3.3-V ABT octal transparent D-type latch with 3-state outputs microcircuit, with an operating temperature range of -40°C to +85°C. -
MIL-HDBK-199C
Abstract: This handbook is for guidance only. This handbook cannot be cited as a requirement. If it is, the contractor does not have to comply. This handbook consists of the following:
a. Selected standard resistor types, for ... -
A-A-50351A
Abstract: This commercial item description (CID) covers the general requirements for hose, bronze, annular corrugated metal, single braid flexible, gas tight. Hose bronze, annular corrugated metal, single braid flexible, gas tight ... -
MIL-DTL-83734H
Abstract: This specification covers plug-in electronic component sockets for use on panel boards, printed circuit boards, and microelectronic components (see 6.1). Intended Use: Sockets covered by this specification ... -
DSCC-DWG-04054
Abstract: This drawing describes the requirements for a hermetically sealed electromechanical relay supplied to the requirements of this drawing. Intended Use: Relays conforming to this drawing are intended for use ... -
MIL-DTL-83413C
Abstract: This specification covers electrical aircraft grounding connectors and grounding assemblies, including plugs, receptacles, grounding clamp, connectors, jumper cable assemblies, and other accessories.Intended Use: ... -
SMD-5962-95740 REV C
Abstract: This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are ... -
MIL-DTL-9419G
Abstract: This specification covers four-position, momentary on, center off, positive action switch with free return to the off position.Intended Use: The switches covered by this specification are intended for mounting ... -
DSCC-DWG-94043 REV A
Abstract: This drawing outlines the requirements for a specific member of a family of compact high contact density (.025 inch) two piece nanominiature electrical connectors. These connectors are intended for printed circuit board, ... -
DSCC-DWG-01038 REV B
Abstract: This drawing covers the detail requirements for a silicon pin diode. Two levels of product assurance are provided for each device type as specified in MIL-PRF-19500. This drawing may be used as a substitute for MIL-PRF-19500/443, ... -
MIL-PRF-49291D
Abstract: This specification covers the general requirements and characteristics of optical fibers for signal transmission. The fiber is defined as the core, cladding, and protective coatings applied during the fiber drawing ... -
MIL-PRF-83401/22B (1)
Abstract: This specification covers the associated requirements for style RZ220, 8 pin single-in-line package (SIP) resistor networks. This style is available in all characteristics and all resistance tolerances. This specification ...