درباره ما
API RP 5L7
Recommended Practices for Unprimed Internal Fusion Bonded Epoxy Coating of Line Pipe - Second Edition
Organization:
API - American Petroleum Institute
Year: 2010
Abstract: This Recommended Practice provides for UNPRIMED INTERNAL FUSION BONDED EPOXY COATING OF LINE PIPE for use in transportation pipelines in the petroleum industry. The recommendation provided herein covers:
a. Section 1 Scope
Section 2 Coating Material Specification
Section 3 Laboratory Coating Testing
Section 4 Application Practices
Section 5 Production Inspection and Acceptance Procedures
Within this Recommended Practice:
1) "Shall" is used to indicate that a provision is mandatory.
2) "Should" is used to indicate that a provision is not mandatory, but recommended as good practice.
3) "May" is used to indicate that a provision is optional.
b. The Recommended Practice is limited to the application of internal coatings on unused pipe prior to installation. It should be recognized that there may exist differences in the surface condition of pipe produced by the various pipemaking processes permitted under the latest editions of API standards. Surface conditions may preclude the coating of such pipe.
c. It is intended that the Applicator be responsible for assuring compliance with all of the provisions of this practice; however, the Purchaser may make any investigation necessary to satisfy himself of compliance by the Applicator.Intended Use: SCO
a. Section 1 Scope
Section 2 Coating Material Specification
Section 3 Laboratory Coating Testing
Section 4 Application Practices
Section 5 Production Inspection and Acceptance Procedures
Within this Recommended Practice:
1) "Shall" is used to indicate that a provision is mandatory.
2) "Should" is used to indicate that a provision is not mandatory, but recommended as good practice.
3) "May" is used to indicate that a provision is optional.
b. The Recommended Practice is limited to the application of internal coatings on unused pipe prior to installation. It should be recognized that there may exist differences in the surface condition of pipe produced by the various pipemaking processes permitted under the latest editions of API standards. Surface conditions may preclude the coating of such pipe.
c. It is intended that the Applicator be responsible for assuring compliance with all of the provisions of this practice; however, the Purchaser may make any investigation necessary to satisfy himself of compliance by the Applicator.Intended Use: SCO
Collections
:
Show full item record
| contributor author | API - American Petroleum Institute | |
| date accessioned | 2017-09-04T16:23:27Z | |
| date available | 2017-09-04T16:23:27Z | |
| date copyright | 06/01/1988 (R 2010) | |
| date issued | 2010 | |
| identifier other | TSSRZCAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/86814 | |
| description abstract | This Recommended Practice provides for UNPRIMED INTERNAL FUSION BONDED EPOXY COATING OF LINE PIPE for use in transportation pipelines in the petroleum industry. The recommendation provided herein covers: a. Section 1 Scope Section 2 Coating Material Specification Section 3 Laboratory Coating Testing Section 4 Application Practices Section 5 Production Inspection and Acceptance Procedures Within this Recommended Practice: 1) "Shall" is used to indicate that a provision is mandatory. 2) "Should" is used to indicate that a provision is not mandatory, but recommended as good practice. 3) "May" is used to indicate that a provision is optional. b. The Recommended Practice is limited to the application of internal coatings on unused pipe prior to installation. It should be recognized that there may exist differences in the surface condition of pipe produced by the various pipemaking processes permitted under the latest editions of API standards. Surface conditions may preclude the coating of such pipe. c. It is intended that the Applicator be responsible for assuring compliance with all of the provisions of this practice; however, the Purchaser may make any investigation necessary to satisfy himself of compliance by the Applicator.Intended Use: SCO | |
| language | English | |
| title | API RP 5L7 | num |
| title | Recommended Practices for Unprimed Internal Fusion Bonded Epoxy Coating of Line Pipe - Second Edition | en |
| type | standard | |
| page | 28 | |
| status | Active | |
| tree | API - American Petroleum Institute:;2010 | |
| contenttype | fulltext |