Show simple item record

MICROCIRCUIT, DIGITAL, 3.3-V DIGITAL SIGNAL PROCESSOR, 32-BIT, MONOLITHIC SILICON

contributor authorDLA - CC - DLA Land and Maritime
date accessioned2017-09-04T16:28:06Z
date available2017-09-04T16:28:06Z
date copyright36488
date issued1999
identifier otherUEXYJAAAAAAAAAAA.pdf
identifier urihttps://yse.yabesh.ir/std/handle/yse/91281
description abstractThis drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN.
The PIN is as shown in the following example: ILLUSTRATION
Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type(s) identify the circuit function as follows:
    Device type   Generic number                   Circuit function          01           21062L        3.3-V digital signal processor, 32-bit, 2 Mbit SRAM         02           21060L        3.3-V digital signal processor, 32-bit, 4 Mbit SRAM


The device class designator is a single letter identifying the product assurance level as follows:
    Device class                 Device requirements documentation           M         Vendor self-certification to the requirements for MIL-STD-883 compliant,                    non-JAN class level B microcircuits in accordance with MIL-PRF-38535,                    appendix A         Q or V      Certification and qualification to MIL-PRF-38535


The case outline(s) are as designated in MIL-STD-1835 and as follows:
    Outline letter   Descriptive designator   Terminals   Package style             X              See figure 1           240      Gull wing flatpack cavity down heat sink            Y              See figure 1           240      Gull wing flatpack cavity up heat sink            T              See figure 1           240      Flatpack with non-conductive tie-bar                                                           cavity down heat sink            U              See figure 1           240      Flatpack with non-conductive tie-bar                                                           cavity up heat sink


The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M.
    Supply voltage range (VDD) .................... −0.3 V dc to +4.6 V dc     Input voltage range (VIN) ..................... −0.3 V dc to VDD + 0.3 V dc     Output voltage range (VOUT) ................... −0.3 V dc to VDD + 0.3 V dc     Load capacitance .............................. 200 pF     Lead temperature (soldering, 5 seconds) ....... +280°C     Storage temperature range (TSTG) .............. −65°C to + 150°C     Maximum power dissipation (PD) ................ 5 W     Thermal resistance junction-to-case (ΘJC):       Cases X, Y, T, and U ........................ 0.24°C/W


    Supply voltage range (VDD) .................... +3.13 V dc to +3.47 V dc     Case operating temperature range (TC) ......... −55°C to + 125°C


    Fault coverage measurement of manufacturing       logic tests (MIL-STD-883, test method 5012).. XX percent 2/


Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device class Q devices will replace device class M devices.
languageEnglish
titleSMD-5962-96744 REV Anum
titleMICROCIRCUIT, DIGITAL, 3.3-V DIGITAL SIGNAL PROCESSOR, 32-BIT, MONOLITHIC SILICONen
typestandard
page56
statusActive
treeDLA - CC - DLA Land and Maritime:;1999
contenttypefulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record