SMD-5962-96744 REV A
MICROCIRCUIT, DIGITAL, 3.3-V DIGITAL SIGNAL PROCESSOR, 32-BIT, MONOLITHIC SILICON
Organization:
DLA - CC - DLA Land and Maritime
Year: 1999
Abstract: This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN.
The PIN is as shown in the following example:
Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type(s) identify the circuit function as follows:
The device class designator is a single letter identifying the product assurance level as follows:
The case outline(s) are as designated in MIL-STD-1835 and as follows:
The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M.
Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device class Q devices will replace device class M devices.
The PIN is as shown in the following example:
Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device.
The device type(s) identify the circuit function as follows:
Device type Generic number Circuit function 01 21062L 3.3-V digital signal processor, 32-bit, 2 Mbit SRAM 02 21060L 3.3-V digital signal processor, 32-bit, 4 Mbit SRAM
The device class designator is a single letter identifying the product assurance level as follows:
Device class Device requirements documentation M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A Q or V Certification and qualification to MIL-PRF-38535
The case outline(s) are as designated in MIL-STD-1835 and as follows:
Outline letter Descriptive designator Terminals Package style X See figure 1 240 Gull wing flatpack cavity down heat sink Y See figure 1 240 Gull wing flatpack cavity up heat sink T See figure 1 240 Flatpack with non-conductive tie-bar cavity down heat sink U See figure 1 240 Flatpack with non-conductive tie-bar cavity up heat sink
The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M.
Supply voltage range (VDD) .................... −0.3 V dc to +4.6 V dc Input voltage range (VIN) ..................... −0.3 V dc to VDD + 0.3 V dc Output voltage range (VOUT) ................... −0.3 V dc to VDD + 0.3 V dc Load capacitance .............................. 200 pF Lead temperature (soldering, 5 seconds) ....... +280°C Storage temperature range (TSTG) .............. −65°C to + 150°C Maximum power dissipation (PD) ................ 5 W Thermal resistance junction-to-case (ΘJC): Cases X, Y, T, and U ........................ 0.24°C/W
Supply voltage range (VDD) .................... +3.13 V dc to +3.47 V dc Case operating temperature range (TC) ......... −55°C to + 125°C
Fault coverage measurement of manufacturing logic tests (MIL-STD-883, test method 5012).. XX percent 2/
Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device class Q devices will replace device class M devices.
Collections
:
-
Statistics
SMD-5962-96744 REV A
Show full item record
| contributor author | DLA - CC - DLA Land and Maritime | |
| date accessioned | 2017-09-04T16:28:06Z | |
| date available | 2017-09-04T16:28:06Z | |
| date copyright | 36488 | |
| date issued | 1999 | |
| identifier other | UEXYJAAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/91281 | |
| description abstract | This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN. The PIN is as shown in the following example: Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. The device type(s) identify the circuit function as follows: Device type Generic number Circuit function 01 21062L 3.3-V digital signal processor, 32-bit, 2 Mbit SRAM 02 21060L 3.3-V digital signal processor, 32-bit, 4 Mbit SRAM The device class designator is a single letter identifying the product assurance level as follows: Device class Device requirements documentation M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A Q or V Certification and qualification to MIL-PRF-38535 The case outline(s) are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style X See figure 1 240 Gull wing flatpack cavity down heat sink Y See figure 1 240 Gull wing flatpack cavity up heat sink T See figure 1 240 Flatpack with non-conductive tie-bar cavity down heat sink U See figure 1 240 Flatpack with non-conductive tie-bar cavity up heat sink The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M. Supply voltage range (VDD) .................... −0.3 V dc to +4.6 V dc Input voltage range (VIN) ..................... −0.3 V dc to VDD + 0.3 V dc Output voltage range (VOUT) ................... −0.3 V dc to VDD + 0.3 V dc Load capacitance .............................. 200 pF Lead temperature (soldering, 5 seconds) ....... +280°C Storage temperature range (TSTG) .............. −65°C to + 150°C Maximum power dissipation (PD) ................ 5 W Thermal resistance junction-to-case (ΘJC): Cases X, Y, T, and U ........................ 0.24°C/W Supply voltage range (VDD) .................... +3.13 V dc to +3.47 V dc Case operating temperature range (TC) ......... −55°C to + 125°C Fault coverage measurement of manufacturing logic tests (MIL-STD-883, test method 5012).. XX percent 2/ Intended Use: Microcircuits conforming to this drawing are intended for use for Government microcircuit applications (original equipment), design applications, and logistics purposes. Microcircuits covered by this drawing will replace the same generic device covered by a contractor-prepared specification or drawing. Device class Q devices will replace device class M devices. | |
| language | English | |
| title | SMD-5962-96744 REV A | num |
| title | MICROCIRCUIT, DIGITAL, 3.3-V DIGITAL SIGNAL PROCESSOR, 32-BIT, MONOLITHIC SILICON | en |
| type | standard | |
| page | 56 | |
| status | Active | |
| tree | DLA - CC - DLA Land and Maritime:;1999 | |
| contenttype | fulltext |

درباره ما