MIL-DTL-18295F

CHAINS AND FITTINGS FOR FLEET MOORING

contributor author	NAVY - YD - Naval Facilities Engineering Command
date accessioned	2017-09-04T16:29:40Z
date available	2017-09-04T16:29:40Z
date copyright	01/30/1998
date issued	1998
identifier other	UJIBEAAAAAAAAAAA.pdf
identifier uri	https://yse.yabesh.ir/std/handle/yse/92852
description abstract	This specification establishes the requirements for the manufacture, physical performance, and acceptance of mooring chain assemblies. Mooring chain assemblies are to be subjected to long term submergence in seawater and may be subjected to open storage in a marine environment. Intended Use: The mooring chain assembly is intended for mooring seagoing vessels in a moth ball state for up to 15 years as well as other interim uses. The assembly sizes are 1.75 inches (44 mm), 2 inches (51 mm), 2.25 inches (57 mm), 2.5 inches (64 mm), 2.75 inches (70 mm), 3 inches (76 mm), 3.5 inches (89 mm), and 4 inches (102 mm). The chain, which should be of the stud link type, should be procured in lengths of 90 feet (27.4 m). All components should meet the dimensions and tolerances given in figures 1a through 12.
language	English
title	MIL-DTL-18295F	num
title	CHAINS AND FITTINGS FOR FLEET MOORING	en
type	standard
page	51
status	Active
tree	NAVY - YD - Naval Facilities Engineering Command:;1998
contenttype	fulltext
subject keywords	Chain assembly
subject keywords	Lead
subject keywords	Mooring chain
subject keywords	Zinc chromate