درباره ما
MIL-DTL-18295F
CHAINS AND FITTINGS FOR FLEET MOORING
Organization:
NAVY - YD - Naval Facilities Engineering Command
Year: 1998
Abstract: This specification establishes the requirements for the manufacture, physical performance, and acceptance of mooring chain assemblies. Mooring chain assemblies are to be subjected to long term submergence in seawater and may be subjected to open storage in a marine environment. Intended Use: The mooring chain assembly is intended for mooring seagoing vessels in a moth ball state for up to 15 years as well as other interim uses. The assembly sizes are 1.75 inches (44 mm), 2 inches (51 mm), 2.25 inches (57 mm), 2.5 inches (64 mm), 2.75 inches (70 mm), 3 inches (76 mm), 3.5 inches (89 mm), and 4 inches (102 mm). The chain, which should be of the stud link type, should be procured in lengths of 90 feet (27.4 m). All components should meet the dimensions and tolerances given in figures 1a through 12.
Subject: Chain assembly
Collections
:
Show full item record
| contributor author | NAVY - YD - Naval Facilities Engineering Command | |
| date accessioned | 2017-09-04T16:29:40Z | |
| date available | 2017-09-04T16:29:40Z | |
| date copyright | 01/30/1998 | |
| date issued | 1998 | |
| identifier other | UJIBEAAAAAAAAAAA.pdf | |
| identifier uri | https://yse.yabesh.ir/std/handle/yse/92852 | |
| description abstract | This specification establishes the requirements for the manufacture, physical performance, and acceptance of mooring chain assemblies. Mooring chain assemblies are to be subjected to long term submergence in seawater and may be subjected to open storage in a marine environment. Intended Use: The mooring chain assembly is intended for mooring seagoing vessels in a moth ball state for up to 15 years as well as other interim uses. The assembly sizes are 1.75 inches (44 mm), 2 inches (51 mm), 2.25 inches (57 mm), 2.5 inches (64 mm), 2.75 inches (70 mm), 3 inches (76 mm), 3.5 inches (89 mm), and 4 inches (102 mm). The chain, which should be of the stud link type, should be procured in lengths of 90 feet (27.4 m). All components should meet the dimensions and tolerances given in figures 1a through 12. | |
| language | English | |
| title | MIL-DTL-18295F | num |
| title | CHAINS AND FITTINGS FOR FLEET MOORING | en |
| type | standard | |
| page | 51 | |
| status | Active | |
| tree | NAVY - YD - Naval Facilities Engineering Command:;1998 | |
| contenttype | fulltext | |
| subject keywords | Chain assembly | |
| subject keywords | Lead | |
| subject keywords | Mooring chain | |
| subject keywords | Zinc chromate |