درباره ما
NAVY - SH - Naval Sea Systems Command (Ship Systems): Recent submissions
Now showing items 1261-1280 of 2792
-
MIL-H-21367/11
Abstract: This specification is approved for use within the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring ... -
MIL-C-28754/9D
Abstract: This specification is approved for use by all Departments and Agencies of the Department of Defense.
The requirements for acquiring the frame-connector assembly described herein shall consist of this specification ... -
MIL-H-24135/2A
Abstract: This specification covers synthetic rubber hoses, reinforced with four plies of spiral wrapped or two plies spiral wrapped and one ply braided wire in sizes -6 through -16 for high pressure hydraulic applications. ...Subject(s) : Group II , Petroleum , Sea water , Test fluid , -
MIL-F-24787/6
Abstract: This specification covers reusable 180° return fittings for use with wire or synthetic fiber reinforced rubber hose.
The 180° return fittings shall be type U. See MIL-F-24787, table III for identification ...Subject(s) : Synthetic fiber , Wire , -
MIL-T-24708
Abstract: This specification covers lightweight, flexible polyimide foam as a layered thermal acoustic insulation barrier material developed for use within a specific frequency range on submarines. Intended Use: ...Subject(s) : Conductivity , Fire resistant , Flexibility , -
MIL-L-24611A
Abstract: This specification covers requirements for construction and performance for MK 4 life preserver, repair kit and spare parts and test kit for the life preserver support package (see 6.2). Intended Use: ...Subject(s) : Buoyancy , Heat sealing , Inflation lanyard , Inflator assemblies , Inflator stem , Mechanical inflation system , -
A-A-59360
Abstract: This commercial item description (CID) covers self-contained, manually- operated, gravity-fed, mechanically refrigerated cabinets with lift-type or push-type valves. These units are intended to dispense refrigerated milk ... -
MIL-DTL-17901C
Abstract: This specification covers stave shaped and cylindrical shaped bearings that have synthetic rubber facings. Intended Use: The bearings herein specified are intended for use in supporting the rotating propulsion ...Subject(s) : Bearing , Partial Arc , Propulsion , Rubber , Shaft , Stave , Strut , Water , Waterborne , -
MIL-PRF-20042E
Abstract: This specification covers 50, 100, 150, 250, and 400 pound silver brazing bronze pipe flanges for use with water, oil, gas, or steam service not to exceed 425 degrees Fahrenheit (°F). Intended Use: The ...Subject(s) : Brazing rings , Gas service , Oil service , Pipe standards , Steam service , Water service , -
MIL-B-24220A
Abstract: This specification covers single- and multiple-sheave tackle blocks and snatch blocks. Intended Use: Types I, II, III and IV blocks covered by this document are intended to be used with synthetic rope.Subject(s) : Center pin , Non-toppling block , Rig , Sheave , Sister hook ,